Trying to figure out this wastegate that the previous owner installed on my car. I'm less concerned with the brand name (probably not one) and more concerned with the bolt pattern (Tial vs. Hks). Hoping to purchase an upgrade for it (assuming this is a piece of garbage.

Let me know if you have any ideas on it.

 

best photos i could get with some jack stands. I haven't been able to find any info on the exh. manifold....

let me know if there's something else to photograph that would help identify.

 

Looks like a HKS "style" setup to me....Could be a ebay knock off of the hks older style...Usually they have hks on the top of the watesgate this did not..

 

doesn't suprise me. the prev. owner had an ebay turbo on it. possible the manifold is also.


thanks for the info, glen.

 

As mentioned this is HKS standard 40mm "style." The real one would have HKS cast into the top.

 

can i switch it out to a tial 46mm w/ the atp turbo flange?


here's the link

http://www.atpturbo.com/Merchant2/me...gory_Code=WGT1

 

It should work if you have the clearence!

 

thanks. I hope I do.

 

I would run the 44mm over the 46mm proven top flow better as well as being v-banded.