HX40 FD project, stationed in Finland :D
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Finland
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
HX40 FD project, stationed in Finland :D
Hello all, i introduced my car at the Introduce Yourself section and i think im ready to stard my project thread in here
This is my first rotary ever and im loving it all the way and as soon as i get this baby running i think ill be rotorhead4life
So heres what i started with, bad picture i know but it was taken with phonecam
And this is what i have done so far..
The engine is pretty much dismentled and i need to start getting some parts that i dont have yet, including injectors and rails.
And my goal is to get this runnign by summer with this:
Im thinking of getting around 300hp with low boost because the car is allready been driven 110000km and has not been rebuild yet, if i get through next summer without blowing any oil seals ill be glad and start rebuilding then
And for starters i have some questions, can i shave the solenoid clips off from the wiring harness since im running single?
I dont like the look of the wirepunch at all...
And heres my ubrcool wall decoration and the supersmall size carage that im working in
This is my first rotary ever and im loving it all the way and as soon as i get this baby running i think ill be rotorhead4life
So heres what i started with, bad picture i know but it was taken with phonecam
And this is what i have done so far..
The engine is pretty much dismentled and i need to start getting some parts that i dont have yet, including injectors and rails.
And my goal is to get this runnign by summer with this:
Im thinking of getting around 300hp with low boost because the car is allready been driven 110000km and has not been rebuild yet, if i get through next summer without blowing any oil seals ill be glad and start rebuilding then
And for starters i have some questions, can i shave the solenoid clips off from the wiring harness since im running single?
I dont like the look of the wirepunch at all...
And heres my ubrcool wall decoration and the supersmall size carage that im working in
#4
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Finland
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Heres some pics of the jig and turbo, looking really nice
http://i57.photobucket.com/albums/g2...a/SDC13525.jpg
http://i57.photobucket.com/albums/g2...a/SDC13528.jpg
http://i57.photobucket.com/albums/g2...a/SDC13525.jpg
http://i57.photobucket.com/albums/g2...a/SDC13528.jpg
#7
i have one but carnt find a dam smaller hotside for the hx40 grr , here in the uk seems hard to get hold of the right part , but man this is one hell of a project ill be keeping my eyes peeled here , keep the brillant work up ,,,
Thread
Thread Starter
Forum
Replies
Last Post