I have a HKS T4 Manifold for a FD and was wondering if the gt35r turbo would fit with out hitting the chassis?

Its this manifold
http://www.rx7store.net/product_p/hk...-95%20rx-7.htm

With this turbo
http://www.rx7store.net/Garrett_GT35...0gt3582rt4.htm

I searched but didn't find anything

Thanks

 

that mani is for fd. the turbo is for fd too. why hit the chassis?the turbo has t4 inlet same as the mani too.

 

The HKS mani. was a short runner design so its place really low and wanted to make sure the turbo will fit in between the engine and chassis with this mani.

I just want to make sure i have enough clearance for the the turbo with the hks mani. before i spend $1300

Those parts are for the fd but not all manifolds are designed the same there for the placement of the turbo would be different

 

dedpends on which hotside you get and if you buy or a real T4 or not

 

Its the same turbo in the link with the 1.06 A/R