HKS Gt wastegate
#1
Senior Member
Thread Starter
Join Date: Feb 2006
Location: burbank ca
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
HKS Gt wastegate
This hks wastegate came with my t51r kai turbo kit.. I just want to know what size spring it came with....Also there are 4 vacuum ports what ones are used/caped?
thanks
thanks
#5
Lives on the Forum
It depends...
If you are using straight vacuum, use one of the holes "under" the cap.
The WG's have two fittings - 180-degrees opposite of each other - just to give you more flexible mounting options.
Just use one and PLUG the other one, and you're all good.
If you're not using the "top" fittings, you need to at least keep one (or both) open.
You only use these top fittings if you use a boost controller.
-Ted
If you are using straight vacuum, use one of the holes "under" the cap.
The WG's have two fittings - 180-degrees opposite of each other - just to give you more flexible mounting options.
Just use one and PLUG the other one, and you're all good.
If you're not using the "top" fittings, you need to at least keep one (or both) open.
You only use these top fittings if you use a boost controller.
-Ted