Here's the part numbers for a feed line.
Thread Starter
Glug Glug Glug Burp
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
Here's the part numbers for a feed line.
Took me a little searching...
AER-FCM2002 x1 -4 AN - 1/4NPT male connector
AER-FCM1021 x2 45 deg -4AN elbow
AER-FCA0403 x1 3 feet -4AN steel braidid line
EAR-9919BFG x1 12 x 1.5mm -4AN Adapter
Just figured I'd throw it out there in case anyone wanted to make a line. The last part on the list will allow you to run -4 AN line straight from the 13bREW block to a turbo. Not sure if the thread size is the same for all motors, but it probably is.
AER-FCM2002 x1 -4 AN - 1/4NPT male connector
AER-FCM1021 x2 45 deg -4AN elbow
AER-FCA0403 x1 3 feet -4AN steel braidid line
EAR-9919BFG x1 12 x 1.5mm -4AN Adapter
Just figured I'd throw it out there in case anyone wanted to make a line. The last part on the list will allow you to run -4 AN line straight from the 13bREW block to a turbo. Not sure if the thread size is the same for all motors, but it probably is.
Trending Topics
Lawn Ornament
Joined: Apr 2001
Posts: 2,416
Likes: 2
From: St Louis, USA
anplumbing has crappy customer service also...... im gonna have fun trying to get it changed... lol
no worries Justin, not your fault..... at least we know for future reference what the correct fitting is
no worries Justin, not your fault..... at least we know for future reference what the correct fitting is
Thread Starter
Glug Glug Glug Burp
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
Originally posted by ejmack1
anplumbing has crappy customer service also...... im gonna have fun trying to get it changed... lol
no worries Justin, not your fault..... at least we know for future reference what the correct fitting is
anplumbing has crappy customer service also...... im gonna have fun trying to get it changed... lol
no worries Justin, not your fault..... at least we know for future reference what the correct fitting is
Thread Starter
Glug Glug Glug Burp
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
Yup. That's the one. Funny that I ordered it, was told it was the WRONG one, and changed the order only to find out it was the right one in the beginning!!! Brother I have some shitty luck...
Thread Starter
Glug Glug Glug Burp
Joined: Jan 2002
Posts: 3,819
Likes: 0
From: Scott AFB, IL
Sorry, Summitracing has them as well. Call them though... Because the site doesn't list it! 1-800-230-3030
I'm on my way to a BADASS shop in Granite city... If they have one I'll grab it for you.
1-800-230-3030I'm on my way to a BADASS shop in Granite city... If they have one I'll grab it for you.
Lives on the Forum
Joined: Feb 2001
Posts: 9,617
Likes: 8
From: Dallas
I use the Earls 14x1.5mm-4an block adaptor but...
If you go to www.pegasusautoracing.com you can buy 4an stainless hose premade with a straight 4an swivel on one end and a 90 degree swivel 4an on the other. That way it's preassembled, AND you still have a 90 degree swivel at one end
4an straight to 4an 90 degree:
4-12-S-90 (12" length)
4-14-S-90 (14" length)
4-16-S-90 (16" length)
4-18-S-90 (18" length)
4-21-S-90 (21" length)
They also have preassembled 3an lines; just ask.
All of them are just over $20. They also have 4an straight/4an straight for slightly cheaper if that's what you need.
If you go to www.pegasusautoracing.com you can buy 4an stainless hose premade with a straight 4an swivel on one end and a 90 degree swivel 4an on the other. That way it's preassembled, AND you still have a 90 degree swivel at one end
4an straight to 4an 90 degree:
4-12-S-90 (12" length)
4-14-S-90 (14" length)
4-16-S-90 (16" length)
4-18-S-90 (18" length)
4-21-S-90 (21" length)
They also have preassembled 3an lines; just ask.
All of them are just over $20. They also have 4an straight/4an straight for slightly cheaper if that's what you need.
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
Jan 30, 2016 05:50 AM
josef 91 vert
2nd Generation Specific (1986-1992)
23
Sep 3, 2015 11:20 AM
