can you guys help me put together a list of what i need for a non-intercooled turbo setup on my 12a?

FYI, i plan to run an externally gated t04e (50trim) on 10 psi non intercooled with 93 octane and meth injection, im in the process of sending my mikuni carb out to be boost prepped

what are your part reccomendations and what specific things do i need for the 12a?

thanks

 

do a search, I did a write up that was archived in the 1st gen section. I highly suggest an intercooler if you want your engine to last. Methanol injection is tricky, and the fuel needs to be tuned back some to compensate for the extra methanol coming into the engine... if your methanol injection system stops working or you run out of methanol in the middle of a pull, then your engine goes pop.

 

i read your threads..thanks for the heads up.

my big concern right now is the fuel system. my mikuni 44 side draft is going to rotary shack to be prepped for boost.

what fuel pump and regulator? i made another post about it but im not getting any replies

 

walbro 255 lph, aeromotive a1000 #13204. malory also makes a good one. you will be golden.