GT35/40 fit with an XS T04 manifold?
#2
Lives on the Forum
The "GT35" side of the turbo is the turbine side, which implies it's a T3 turbine flange.  It will not fit the XS manifold.  The XS manifold is divided - I would recommend you take advantage of that and run a divided T04 turbine.
-Ted
-Ted
#3
Ted is on the money.
GT35/40 turbo has a t3 footprint.
You'll need an adapter flange (HKS has one for about $100), but you'll need to check if there is clearance around the flange for bolts since the adapter flange has threaded holes for the T04 and T3 sides.
Either get a T04 based turbo or get another manifold.
I welded my adapter flange to my manifold. I can post pics soon, but it was not a good experience. I would get a manifold built for a T3 next time over.
J
GT35/40 turbo has a t3 footprint.
You'll need an adapter flange (HKS has one for about $100), but you'll need to check if there is clearance around the flange for bolts since the adapter flange has threaded holes for the T04 and T3 sides.
Either get a T04 based turbo or get another manifold.
I welded my adapter flange to my manifold. I can post pics soon, but it was not a good experience. I would get a manifold built for a T3 next time over.
J
Thread
Thread Starter
Forum
Replies
Last Post
kkev.7788
2nd Generation Specific (1986-1992)
7
09-02-15 01:32 PM