Greddy wastegate flange Q
Thread Starter
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
Greddy wastegate flange Q
Is the greddy wastegate flange accept any other wasteagates w/o modification? I have the 4 bolt square flange on my manifold. Tial looks close, does it fit?
-Jacob
-Jacob
Thread Starter
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
From what i understand greddy wasteagates have 2 or more flange sizes, from the images ive seen the 'R' and 'C' series are the larger flange which looks like what i have, is this correct?
seven-less
Joined: Apr 2003
Posts: 2,082
Likes: 0
From: city of houston.... y0!
just to clear this up....
the wastegate flange that should be used on the greddy cast is the type R flange. the part numbers are
for the flange:11900361
and for the gasket:11900410
these are kinda hard to get. go to greddy's website and look up their dealers section. find a shop close to you and give them the part #'s. it should take 7-14 days to get to your door only because they more than likely have to get them from greddy themselves. total price should be about $20-$25 shipped for both.
the wastegate flange that should be used on the greddy cast is the type R flange. the part numbers are
for the flange:11900361
and for the gasket:11900410
these are kinda hard to get. go to greddy's website and look up their dealers section. find a shop close to you and give them the part #'s. it should take 7-14 days to get to your door only because they more than likely have to get them from greddy themselves. total price should be about $20-$25 shipped for both.
