going single turbo comparison
11-20-08, 11:16 PM
#1
going single turbo comparison
so i turned my last motor into a grenade and will be in the process of a rebuild and want to go single. im going to do a large streetport and looking to get ne weres from 380 to 425 to the wheels reliably. im stuck on garret turbos. my buddy runs a gt35r at 15lbs with a half bridge and makes 425, fully spools around 4k with his setup. i like his turbo but would like to know if the gt40r or the gt4088r would be entirely diff. i want his setup but want to be diff. would the 40 series lag alot more than a 35? i like were it fully boost around the 4k mark. all help would be great.
11-22-08, 08:17 PM
#3
Senior Member
Join Date: Jul 2005
Location: Lancaster, NY
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
I have a GT4088 non-ball bearing with a 1.06 hot side and i love it. It makes 10psi before 4K on a large street port motor. The guys at the RX7 Store made over 500 whp on a very similar setup and the same turbo at 19psi on pump gas and meth inj.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM