going big single couple questions?
#1
Rotary Enthusiast
Thread Starter
going big single couple questions?
hey all i have a 89 TII and i am trying to get an idea on cost and time frame requirements for going with bigger turbo. my goal is to hit 400rwhp on pump gas. i currently have a isuzu npr large front mount to put on along with a microtech stand alone and a set of 1200cc secondaries.
http://store.yahoo.com/cheapturbo/gatot96ar.html
this is the turbo i have been thinking about going with.
http://66.216.67.51/product.asp?0=221&1=327&3=460
this will work with that turbo right? just trying to make sure. also i know that im going to need a wastegate and exhaust. there is a shop here local that i have ben refered to for all my ic piping and exhaust needs. so my question is do i need that vband kit off of cheap turbo? also what else will i need? like what am i leavin out?
any advice and or tips would be greatly appreciated.
http://store.yahoo.com/cheapturbo/gatot96ar.html
this is the turbo i have been thinking about going with.
http://66.216.67.51/product.asp?0=221&1=327&3=460
this will work with that turbo right? just trying to make sure. also i know that im going to need a wastegate and exhaust. there is a shop here local that i have ben refered to for all my ic piping and exhaust needs. so my question is do i need that vband kit off of cheap turbo? also what else will i need? like what am i leavin out?
any advice and or tips would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM