85Gen1

hey all,
so the turbo i had on my 1st gen blew a seal and i bought a 16g tubo because i could afford it but the problem is the outlet on the cold side is pointing at my block... my question is can you rotate the cold side housing if it has an inetrnal wastegate? i was going to try and make a bracket for the gate so it stayed in the same spot but i was not sure if you can do this with these turbos? any help would be awesome,
thanks

Fatboy Garage

iTrader: (4)

Yes it will be fine to clock the cold side as long as you make a custom bracket for the actuator. There shouldn't be any problems.

85Gen1

ok, thanks for the confirmation!