I'm just making sure I covered everything I would need to do a single turbo from a stock setup.

1. Turbo
2. Manifold
3. Wastegate
4. Intercooler (with piping)
5. BOV
6. Down pipe
7. Injectors
8. Fuel Rail
9. Engine managment
10. Fuel pressure regulator
11. Fuel Pump
12. Boost controller
13. All gaskets and fittings for fuel and turbo.
14. Tuning
15. Clutch/Flywheel


Anything I'm missing? There has to be something.

 

Yes.. a new engine when its complete

 

twin power

 

depending on what size turbo, you will probley also need meth injection and 3bar mapsensor.
boost..boost..

 

I had planned on the ported rebuilt motor prior to all this, anyway.

 

This is a great resource.....the last page details the bazillion little things you'll need, and they add up. I probably spend over $500 on all of it:

http://www.negative-camber.org/crispyrx7/gt35rpage1.htm

 

just $500?????

 

plumbing?
Couplers?
Clamps?
Silicone hose?

 

don't forget midpipe/high flow cat

and yes! twins! (looking at 7 rocket sig) i mean twin power

 

sticky tires and lots of gas!!!

 

Depending on the condition of the car, many OEM parts may need replacing. Figure at least another $1,500 to fix miscellaneous issues that will be uncovered (i.e. wiring harness, bad motor mounts, sensors, etc.). Unless the car is real low milage, new sensors are a good idea (the computer needs good info from the sensors to work properly).

Jack

 

Forgot to add patience.

 

^ tons of it

 

Thanks Rich, That website was just what I was looking for.

 

Wideband A/f Gauge

 

Not to get off topic, but what's the best meth kit to get.

 

check out fjo racing for their meth setup. you can spray different amounts of meth based on both load and rpm.