FAQ'S I Have common questions...
#1
Senior Member
Thread Starter
FAQ'S I Have common questions...
I'm putting a turbo II motor into my 77 Savannah 1st gen right hand drive.
I could use suggestions on Turbo Size, Injector Size, wategate and intercooler.
The Atkins Rotary Guy (I ordered a SP TurboII Motor) said as I was looking for a 300HP engine he suggested I just use a stock turbo set up.
I have a HalTech that I plan to run the engine with.
He suggested slightly bigger secondary injectors.
I know these questions have been asked before. Are there FAQ's? Where?
This vehicle will be used as a regular driver with full interior and A/C.
THANKS!!!
THE FORUM IS MOST HELPFUL!! I have a shop and I hope I can repay all of the kindness I have found here online!
Thomas
I could use suggestions on Turbo Size, Injector Size, wategate and intercooler.
The Atkins Rotary Guy (I ordered a SP TurboII Motor) said as I was looking for a 300HP engine he suggested I just use a stock turbo set up.
I have a HalTech that I plan to run the engine with.
He suggested slightly bigger secondary injectors.
I know these questions have been asked before. Are there FAQ's? Where?
This vehicle will be used as a regular driver with full interior and A/C.
THANKS!!!
THE FORUM IS MOST HELPFUL!! I have a shop and I hope I can repay all of the kindness I have found here online!
Thomas
Last edited by KehoeAutomotive; 01-17-04 at 05:11 PM.
#3
If you go to the main Single Turbo page and look towards the top there will be a Single Turbo Archive. You'll probably find recommended setups and what not. Other then that you can search for "turbo setups" and browse amongst the results and look for street driven setups.
Although this is the best way to get a peronalized answer it'd probably be based to get a general idea with a search then hit some questions on a little more specific questions.
You'll have to address a lot of different issues such as:
Will this car ever hit the track
What do you want your 1/4 to be
How driveable are willing to make this car
etc.
Although this is the best way to get a peronalized answer it'd probably be based to get a general idea with a search then hit some questions on a little more specific questions.
You'll have to address a lot of different issues such as:
Will this car ever hit the track
What do you want your 1/4 to be
How driveable are willing to make this car
etc.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM