Single Turbo RX-7's Questions about all aspects of single turbo setups.

EGT questions, where should i be?

Thread Tools
 
Search this Thread
 
Old 08-17-07, 10:14 PM
  #1  
Learned alot | Alot to go

Thread Starter
iTrader: (2)
 
CrackHeadMel's Avatar
 
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes on 0 Posts
EGT questions, where should i be?

What kind of egt's should i see cruise? at boost / vac transitin? in boost (say 5lbs?)

right now im seeing between 600 and 700c sometimes creeping a little higher due to the backed off timming in my cruise area's taht im almost done fixing


also, should my hotside glow? i had it cherry red after a ride i gave to a friend, i babyed it home and i could see some red by the v-band connector on my hotside, and that was with almost no boost for 5 miles, egt's around 650-675

egt gauge is the hks one that matches a 2nd gen stock gauges, its also rather slow imho
Old 08-18-07, 07:23 AM
  #2  
Gone Race'n

iTrader: (4)
 
moremazda's Avatar
 
Join Date: Dec 2001
Location: Rockford, IL
Posts: 1,544
Likes: 0
Received 0 Likes on 0 Posts
The glowing is normal..... steel will start glowing deep red at about 900 Fahrenheit.

650C =1202F

As far as numbers go I am getting ~1200F at cruise. ~32 deg timing 14.5-14.7 AFR
Old 08-18-07, 07:47 AM
  #3  
brap brap brap

iTrader: (7)
 
AlexG13B's Avatar
 
Join Date: Jul 2003
Location: Florida
Posts: 3,149
Received 43 Likes on 32 Posts
i see around 1200-to sometimes 1400 depending on rpms under cruising with same AFR. EGT located on downpipe stock turbo.
Old 08-18-07, 09:45 AM
  #4  
Banned. I got OWNED!!!
 
rotatech7's Avatar
 
Join Date: Jul 2007
Location: miami
Posts: 373
Likes: 0
Received 0 Likes on 0 Posts
whats the most you can go?? i mean dnt go over ??? when racing
Old 08-19-07, 10:02 AM
  #5  
brap brap brap

iTrader: (7)
 
AlexG13B's Avatar
 
Join Date: Jul 2003
Location: Florida
Posts: 3,149
Received 43 Likes on 32 Posts
with those tempatures im running the most 28 degress advance at 3,000RPMS. at about 15"HG of vac. could i advance it more?
Old 08-22-07, 07:38 PM
  #6  
Learned alot | Alot to go

Thread Starter
iTrader: (2)
 
CrackHeadMel's Avatar
 
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes on 0 Posts
yeah, i think i run about 40deg of advance around there personaly (around 14.8-15.1 afr's), egt's around 650-700c, however at higher rpm's egt's start to creep and i have to richin it up to just under stoic
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: EGT questions, where should i be?



All times are GMT -5. The time now is 12:34 PM.