Ebay turbo blanket is anyone using one?
#1
Ebay turbo blanket is anyone using one?
They dont look too bad, and while they are cheap, they are not so cheap that it makes me instantly think they are junk.
Does anyone have any experience with one of these? Are they good quality?
http://cgi.ebay.com/ebaymotors/T3-T4...mZ300316757658
Does anyone have any experience with one of these? Are they good quality?
http://cgi.ebay.com/ebaymotors/T3-T4...mZ300316757658
#3
Turbo vert
iTrader: (33)
THESE BLANKETS ARE LAGIT!!!!!!!!! just put one on a top mount big 37R. the temps in the car would not go below 210. put this on there dropped to bout 195 but anyhow. yea you can drive all day for hours go on cruzes and pop the hood put your hand right on it. There lagit. Im getting one for my car but i am also using this stuff that the steel plant uses to put over hot iron and im packing it on the inside (betwwen the turbo and blanket)of the blanket. this tuff is about half inch thick and you can take tourches put your hand on one side the torch on the other and won't feel it for like ten sec. and thats 2700+ degrees. the stuff looks like cotton. If your interested in a 12x12 sheet PM me.
#5
Rotary Enthusiast
THESE BLANKETS ARE LAGIT!!!!!!!!! just put one on a top mount big 37R. the temps in the car would not go below 210. put this on there dropped to bout 195 but anyhow. yea you can drive all day for hours go on cruzes and pop the hood put your hand right on it. There lagit. Im getting one for my car but i am also using this stuff that the steel plant uses to put over hot iron and im packing it on the inside (betwwen the turbo and blanket)of the blanket. this tuff is about half inch thick and you can take tourches put your hand on one side the torch on the other and won't feel it for like ten sec. and thats 2700+ degrees. the stuff looks like cotton. If your interested in a 12x12 sheet PM me.
They are actually from Pro Tech Performance which is a US Shop and they are the ones selling them (hassptp= Pro-Tech Performance). I've had one for a while and it works great.
Chris
Trending Topics
#8
I got the same one from Ebay. I will say it does work and does its job and you can touch it with your hand while the car is running etc.. Its the craftmanship and quality im a little disappointed about. The stainless steel threads stick out of the edges so when you try to touch it or say you have to take it off you get poked and thats annoying.. I should have spent alittle more and got a product I didnt need to wear gloves to remove. Get what you pay for I guess.
#9
Turbo vert
iTrader: (33)
I got the same one from Ebay. I will say it does work and does its job and you can touch it with your hand while the car is running etc.. Its the craftmanship and quality im a little disappointed about. The stainless steel threads stick out of the edges so when you try to touch it or say you have to take it off you get poked and thats annoying.. I should have spent alittle more and got a product I didnt need to wear gloves to remove. Get what you pay for I guess.
#10
bottom buttons ? Mine doesnt have buttons it has two holes and a steel wire to tie it together with lol. My advice spend the extra 50 bucks and get a HKS one or a quality piece. BTW mine is new and started to fray as soon as i put it on.
#16
lol, I didn't even notice my toe... glad everyone is enjoying it .
I installed the blanket yesterday, fitment was good, but my turbo sits so close to the fender wall that I had to remove some of the fiberglass (or whatever it is) padding on the side of the blanket to slide it on.
I installed the blanket yesterday, fitment was good, but my turbo sits so close to the fender wall that I had to remove some of the fiberglass (or whatever it is) padding on the side of the blanket to slide it on.
Thread
Thread Starter
Forum
Replies
Last Post