Dynoed
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 357
Likes: 0
From: US
Dynoed with MVA Motorsport tuning
But with issues.
Results were 601.8 hp at 26psi and 480lbs of torque. At 6600 rpm. I will post the dyno sheet tonight.
Mario
Results were 601.8 hp at 26psi and 480lbs of torque. At 6600 rpm. I will post the dyno sheet tonight.
Mario
Last edited by T88Kid; Sep 19, 2002 at 10:17 AM.
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 357
Likes: 0
From: US
mostly tuning and secondary injector problems. We will be back on the dyno in a few days when i get the secondaries back.
This is a list of mods: Greddy T88 turbo w/1.15 housing, Greddy elbow, Greddy FMIC, ported upper and portmatched lower, MVA Motorsports street port, extra pins on block, 4msd 6a, 4 msd coils, 4inch dp, Greddy exhaust, HKS wastegate. 850 primaries, 1600 secondaries, Boch racepump, supra intank pump, fuel lines, Microtech ECU.
I'm at work now......I'll post dyno sheet tonight.
Mario
This is a list of mods: Greddy T88 turbo w/1.15 housing, Greddy elbow, Greddy FMIC, ported upper and portmatched lower, MVA Motorsports street port, extra pins on block, 4msd 6a, 4 msd coils, 4inch dp, Greddy exhaust, HKS wastegate. 850 primaries, 1600 secondaries, Boch racepump, supra intank pump, fuel lines, Microtech ECU.
I'm at work now......I'll post dyno sheet tonight.
Mario
Damn Mario, you just ruined my day!
I was hoping to make 525 hp at 26 psi, that 525 would have made me soooooooo happy until i read your post
now i have a new mark to shoot for on my next motor build.
NICE NUMBERS!!!!! and at only 6600RPM? DAMN!
I was hoping to make 525 hp at 26 psi, that 525 would have made me soooooooo happy until i read your post
now i have a new mark to shoot for on my next motor build.
NICE NUMBERS!!!!! and at only 6600RPM? DAMN!
Trending Topics
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 357
Likes: 0
From: US
Thx guys. i have it at 10psi right now and it pulls really hard. it pulls very hard before boost even kicks in. These guys did a real good job on my motor.
Again thanks for the comments guys.
Again thanks for the comments guys.
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 357
Likes: 0
From: US
Originally posted by SPEED_NYC
Damn Mario, you just ruined my day!
I was hoping to make 525 hp at 26 psi, that 525 would have made me soooooooo happy until i read your post
now i have a new mark to shoot for on my next motor build.
NICE NUMBERS!!!!! and at only 6600RPM? DAMN!
Damn Mario, you just ruined my day!
I was hoping to make 525 hp at 26 psi, that 525 would have made me soooooooo happy until i read your post
now i have a new mark to shoot for on my next motor build.
NICE NUMBERS!!!!! and at only 6600RPM? DAMN!
Mario
mine is pretty streetable too, but i'm scared to drive it to work (scratches, door dings)
if i dont make at least 550, i'm gonna have to sell the T66 and go T88 or T51R
when my GF gets mad at me for spending all this $$ i'll just tell her 'mario made me do it!'
Mario, check your PM's!
if i dont make at least 550, i'm gonna have to sell the T66 and go T88 or T51R
when my GF gets mad at me for spending all this $$ i'll just tell her 'mario made me do it!'
Mario, check your PM's!
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 357
Likes: 0
From: US
Originally posted by Dont_Be_A_Rikki
Sweet numbers dude. Got any video of it. I would love to add it to my collection.
-Rikki
Sweet numbers dude. Got any video of it. I would love to add it to my collection
.-Rikki
Mario
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 357
Likes: 0
From: US
Originally posted by SPEED_NYC
mine is pretty streetable too, but i'm scared to drive it to work (scratches, door dings)
if i dont make at least 550, i'm gonna have to sell the T66 and go T88 or T51R
when my GF gets mad at me for spending all this $$ i'll just tell her 'mario made me do it!'
Mario, check your PM's!
mine is pretty streetable too, but i'm scared to drive it to work (scratches, door dings)
if i dont make at least 550, i'm gonna have to sell the T66 and go T88 or T51R
when my GF gets mad at me for spending all this $$ i'll just tell her 'mario made me do it!'
Mario, check your PM's!
ROFLMAO@ mario made me do it
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 357
Likes: 0
From: US
Originally posted by Fd3BOOST
Nice numbers man. I'm impressed. So who did the motor?
Nice numbers man. I'm impressed. So who did the motor?
