compressor wheel size?
Thread Starter
Rotary Freak
Joined: Dec 2001
Posts: 2,402
Likes: 0
From: chandler, AZ
compressor wheel size?
I was just wondering how big this wheel is in referance to more common turbo's.
inducer- 2.16"
exducer- 3.155"
It's off of a garrett TP38 w/ a 1.10 a/r compressor housing...
Any Idea about how much HP it would support?
Thanks guys!
inducer- 2.16"
exducer- 3.155"
It's off of a garrett TP38 w/ a 1.10 a/r compressor housing...
Any Idea about how much HP it would support?
Thanks guys!
Microtech Tuning!
Joined: Feb 2002
Posts: 1,828
Likes: 0
From: 626 Socal
~54.8mm inducer
~80.1mm exducer
About the same as a T04E 54-trim... It will probably spool quicker because of the larger exducer in relation to the inducer. Probably won't flow enough for anything over 350-ish rwhp..... but that's just a wild guess as it's hard to know without comparing the wheel shape to those of more common ones.
~80.1mm exducer
About the same as a T04E 54-trim... It will probably spool quicker because of the larger exducer in relation to the inducer. Probably won't flow enough for anything over 350-ish rwhp..... but that's just a wild guess as it's hard to know without comparing the wheel shape to those of more common ones.
Last edited by Infini IV; Oct 26, 2004 at 02:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
