compressor housing
#1
Full Member
Thread Starter
Join Date: Nov 2002
Location: new york
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
compressor housing
well here goes i have a 91 T2 with 85k i am running a hks fcd and a p-fcon with 2.5in dp with no cats. all the rest of my mods are obvious(cat back, no ap, no ps, no ac, flywheel, centerforce clutch, bla, bla, bla, bla,)
my question is; can i swap just my compressor housing and wheel on my stock turbo and port my wastegate, or do i have to change my manafold and the entire turbo.
if anyone has done this please let me know how it worked out, and who made the housing and wheel.
my question is; can i swap just my compressor housing and wheel on my stock turbo and port my wastegate, or do i have to change my manafold and the entire turbo.
if anyone has done this please let me know how it worked out, and who made the housing and wheel.
#5
Senior Member
Join Date: Jul 2002
Location: Richland Wa.
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
Turbonetics. But you can only get a to4b housing becouse any bigger will hit your intake manifold. If you upgrade the whole turbo with one with a properly sized exhaust housing, you will make WAY more power at the same boost level.
Thread
Thread Starter
Forum
Replies
Last Post