best rad for single turbo fc?
#1
Boost Addict
Thread Starter
Join Date: Jun 2004
Location: ajax
Posts: 2,274
Likes: 0
Received 0 Likes
on
0 Posts
best rad for single turbo fc?
hey any one have any ideas on a rad for a single turbo fc? i do not want any rads with the tanks on the bottom and on top. that jus don't make much sense to me as heat rises soo..any suggestions? these are the ones i can think of afco, griffen..and those are the only ones..any suggestions would be nice
#2
Freedoms worth a buck o'5
Join Date: May 2001
Location: Calgary Alberta Canada
Posts: 2,544
Likes: 0
Received 1 Like
on
1 Post
The hotest water goes in the top , and the coldest comes out the bottom, if anything the top and bottom tank location is probably the best, if stratification is going to be an issue, its more likely on the side tanked radiator..
That being said, I use a fluidyne, no cooling problems at all, plug and play...Max
That being said, I use a fluidyne, no cooling problems at all, plug and play...Max
#4
Full Member
iTrader: (1)
Join Date: Sep 2002
Location: virginia
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
check out a company called AWR they a make bolt in radiator and let me tell you that it is one of the biggest radiators that have ever seen for an fc. 3 and 3/4 inch thick core. this is what i use on my fc
#5
W. TX chirpin Monkey
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
www.k2rd.com it's the one mentioned above, and it's huge.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM