BAC & FMIC question- help
08-05-02, 11:08 AM
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: Austin, Texas
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
BAC & FMIC question- help
87 TII with a series 5 motor
i am wondering what i can do with the bottom BAC nipple that was connected to the compressor outlet on that "T" assembly (between the stock turbo and the stock inter-heater). should i plumb it into the new compressor outlet by having a alum. nipple welded onto the fmic piping? or should i just put a filter on it. i was told that the filter was ok, but also that the car wont idle right? what should i do?
dave
i am wondering what i can do with the bottom BAC nipple that was connected to the compressor outlet on that "T" assembly (between the stock turbo and the stock inter-heater). should i plumb it into the new compressor outlet by having a alum. nipple welded onto the fmic piping? or should i just put a filter on it. i was told that the filter was ok, but also that the car wont idle right? what should i do?
dave
08-06-02, 09:58 PM
#2
Freedoms worth a buck o'5
Join Date: May 2001
Location: Calgary Alberta Canada
Posts: 2,544
Likes: 0
Received 1 Like
on
1 Post
I just run mine with a filter on it, however there is alot of noise from the intake pulses, if you don't want to hear it, plumb it back into the intercooler piping, I should also tell you though, that I am running a haltech with no airflow meter of course, so if you still have the airflow meter, it needs to see the air going to the Bac valve, or yeah it won't idle right..Max
Thread
Thread Starter
Forum
Replies
Last Post