anibody with the a-spec gt35R with the t4 hot side? opinions
#1
anibody with the a-spec gt35R with the t4 hot side? opinions
hello lookinf for opinions of the kit reliabylity,quality setups with this single kit.
hp, torque and how many hp produce at boot leverls of 15 16 psi
thanks
i own a t-78 greedy full kit but still looking to know ifo on this
hp, torque and how many hp produce at boot leverls of 15 16 psi
thanks
i own a t-78 greedy full kit but still looking to know ifo on this
#3
NorCal 7's Co-founder
Broken09 would be the best person to talk to since he owns one. I can speak on how high the build quality of the kit/manifold is. First rate quality with good customer service. If I remember right Broken09 put down 436rwhp at either 15 or 16psi. That's about as much help as I can be. I would check out A-Spec's sub forum in the group buy area if you are interested though.
Zach
Zach
#4
I am becoming...
iTrader: (1)
Join Date: Jan 2003
Location: Montgomery, AL
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
It's a great kit. Zach got the numbers right it made 436 at 16psi. I have 16psi by about 3500 rpm, and that's on a damaged turbine wheel. You won't be dissappointed if you buy the kit. Feel free to get ahold of me if you have any specific questions.
#5
Senior Member
iTrader: (1)
Join Date: Oct 2001
Location: South Carolina
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
I have this kit as well and the quality is first class! Just be prepared to wait awhile for it....also there is a few tricks to the install that would make it alot easier....granted the problems I experienced in my kit are probably all fixed now considering mine was the first one made.
#6
Just in time to die
iTrader: (1)
Lol, yes they are all worked out. But it is still a little tricky near the turbine/water fitting area. (not a lot of room). We have a few options available. You can check on the link below to get whatever you need to know. Waiting is no longer a issue at the moment as I have supply for now, it is demand I am having a harder time keeping up with. Plus part of Hydoukens wait was development.
https://www.rx7club.com/forumdisplay...sprune=2&f=154
https://www.rx7club.com/forumdisplay...sprune=2&f=154
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
Megasquirt timing map and EGt ?? what do you guys think
immanuel__7
Megasquirt Forum
3
08-22-15 09:34 PM