638 RWHP daily driver
638 RWHP daily driver
Dynoed the fd today at enzo racing, made 638.8 rwhp at 32psi.
motor is a mild streetport ported and built by Rakesh racing
ecu is an autronic SM2 with Autronic 500R CDI installed and tuned by Enzo Racing (enzo250) enzo-racing.com
car runs a GT42R ball bearing T6 with a 1.15 A/R
car is pretty much daily driven still has power steering, AC, and an 1100 watt sound system.
if all goes according to plan i should be running at MIR on Nov 4th
ill post dyno sheet and video's in a day or 2
pic before the ecu change
http://s137.photobucket.com/albums/q...t=100_0205.jpg
Thanks to enzo for all the help and late nights at the shop
rakesh for all your help and for building a great motor
anthony-nyc for the support and helping me out all day today.
and to everyone else that has helped me along the way. i thank you
motor is a mild streetport ported and built by Rakesh racing
ecu is an autronic SM2 with Autronic 500R CDI installed and tuned by Enzo Racing (enzo250) enzo-racing.com
car runs a GT42R ball bearing T6 with a 1.15 A/R
car is pretty much daily driven still has power steering, AC, and an 1100 watt sound system.
if all goes according to plan i should be running at MIR on Nov 4th
ill post dyno sheet and video's in a day or 2
pic before the ecu change
http://s137.photobucket.com/albums/q...t=100_0205.jpg
Thanks to enzo for all the help and late nights at the shop
rakesh for all your help and for building a great motor
anthony-nyc for the support and helping me out all day today.
and to everyone else that has helped me along the way. i thank you
Trending Topics
But then I saw your sig... lol.
Congrats Roan! You drove there on mid 300's and then drove home (in a monsoon) with mid 600's. I don't think I've ever seen you this happy lol. Congrats to your tuner (Enzo) and your engine builder (Rakesh), they did a great job.
Good luck bro,
Anthony
Good luck bro,
Anthony
Joined: Mar 2001
Posts: 30,811
Likes: 653
From: FL-->NJ/NYC again!
Damn, I've been jonesing for a good tune for a while now. I'm assuming that tuning the power fc would be a piece of cake for enzo? Also, where's the dyno located?
Dynoed the fd today at enzo racing, made 638.8 rwhp at 32psi.
motor is a mild streetport ported and built by Rakesh racing
ecu is an autronic SM2 with Autronic 500R CDI installed and tuned by Enzo Racing (enzo250) enzo-racing.com
car runs a GT42R ball bearing T6 with a 1.15 A/R
car is pretty much daily driven still has power steering, AC, and an 1100 watt sound system.
if all goes according to plan i should be running at MIR on Nov 4th
ill post dyno sheet and video's in a day or 2
pic before the ecu change
http://s137.photobucket.com/albums/q...t=100_0205.jpg
Thanks to enzo for all the help and late nights at the shop
rakesh for all your help and for building a great motor
anthony-nyc for the support and helping me out all day today.
and to everyone else that has helped me along the way. i thank you
motor is a mild streetport ported and built by Rakesh racing
ecu is an autronic SM2 with Autronic 500R CDI installed and tuned by Enzo Racing (enzo250) enzo-racing.com
car runs a GT42R ball bearing T6 with a 1.15 A/R
car is pretty much daily driven still has power steering, AC, and an 1100 watt sound system.
if all goes according to plan i should be running at MIR on Nov 4th
ill post dyno sheet and video's in a day or 2
pic before the ecu change
http://s137.photobucket.com/albums/q...t=100_0205.jpg
Thanks to enzo for all the help and late nights at the shop
rakesh for all your help and for building a great motor
anthony-nyc for the support and helping me out all day today.
and to everyone else that has helped me along the way. i thank you
BTW - I didn't know Enzo worked on the VW "Vitito"
nothing else internal wise. 2mm black seals
no pinning, stock shaft.
knonfs, enzo was involved with the wiring and tuning on Vitito (rip)
rich im sure he could handle the power fc tuning for you. give him a call
no pinning, stock shaft.
knonfs, enzo was involved with the wiring and tuning on Vitito (rip)
rich im sure he could handle the power fc tuning for you. give him a call
NYC's Loudest FD
Joined: Mar 2001
Posts: 1,539
Likes: 1
From: Long Island, NY
Hey Roan, I thought only bp motors make power in that range with that much boost, interesting. Let me stop before the porting debate starts off again. In any case, impressive effort by everyone involved with the car's engine builder, tuner and owner.
Last edited by RX794; Oct 27, 2007 at 11:18 AM.
thanks josi, and i will agree with you that streetports can make good power, but i've got a set of half bridgeported plates that are probably going in the car once i get some track time with this set-up and max it out.
OG member, new name
Joined: Sep 2006
Posts: 3
Likes: 0
From: N.J. Shore
Great numbers, I was looking forward to seeing this car run at the fall nats at e-town pre its 638 hp form, now Im really looking forward to seeing you run. It looked like you broke something on the launch at the fall nats, nothing serious I see.
yeah a broke an axle as soon as i dropped the clutch, much to everybody's amusement in the stands. the car was fixed in 40 mins and it drove home that night.
i have been running stock axles for years now and i used to just carry an extra pair to the track with me but after the incident at the fall nats, i'm not hitting the track again untill i get my 300m axles installed
i have been running stock axles for years now and i used to just carry an extra pair to the track with me but after the incident at the fall nats, i'm not hitting the track again untill i get my 300m axles installed
