ChrisRX8PR

I think I started this in the wrong section so U moved it here. People do many builds in this section and hopefully someone will see this and help.

Im creating this thread because I am a little frustrated. I have been trying to find a 304SS (or any stainless for that matter at this point) 3 into 1 collector, merged or formed, slip on or weld on, with 2" primaries and I cant find anything for under 250.00. I think its a bit ridiculous. I have made them in the past but 3 into 1 collectors are the hardest to make well because the cuts aren't evenly spaced. Anyways...I really want to stay from making my own so I am seeking advise. There has to be someone on this site that has purchased a 3 into 1 SS collector for less than 250.00...and I hope they post on this thread.

Thanks in advance.

Chris

p.s. I already looked at mandrel-bends.com but they only have them up to 1.75" primaries...and that does not work. I have also called Burns, Reid Washborn, SPD...etc etc etc...

sub9lulu

iTrader: (7)

thought v6's use them all the time
http://www.coneeng.com/collectors.html

ChrisRX8PR

Yeah the V6's use them and they are available...just not for anything under 250.00 which is ridiculous...I can find them really cheap in Mild steel...

I called Megs(coneeng.com) and they have a 1.875 SS 3 into 1 that I could use. It is meant to fit around 3 1.875" tubes which is too small for me since I will be using 2" OD tubing but it will but up to 2" tubing so I will just have to go with that and use it but welded instead of over the 3 runners. Its considerably cheap though at ~$50 plus shipping so I am sorta happy.

Does anyone know where I can get one that is meant for 2" runners? I would rather find that, if not I will just purchase the one from Megs.

Thanks.

Chris

ScorpionT

iTrader: (3)

Call these guys:
218-493-4509

They have 2" primary, 3 into 1. Theyre also somewhat local to you.

ChrisRX8PR

A little bit better. Thanks for that....if nobody else posts any more sources I will go with one of the above.

Chris