Single Turbo RX-7's Questions about all aspects of single turbo setups.

13b turbo nocking noise

Thread Tools
 
Search this Thread
 
Old 12-02-10, 09:24 AM
  #1  
Junior Member
Thread Starter
 
joshcartech's Avatar
 
Join Date: Sep 2009
Location: miami
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
13b turbo nocking noise

This is the video, the makes the noise only when pushing some boost I was going in 4 gear at the time and half throttle it wasn't even full boost

Here is the link thank guys for the help

http://www.youtube.com/watch?v=1u-KivYLIlk&feature=youtube_gdata_player
Old 12-02-10, 10:30 AM
  #2  
4th string e-armchair QB

iTrader: (11)
 
Trots*88TII-AE*'s Avatar
 
Join Date: May 2005
Location: North Bay, Ontario
Posts: 2,745
Likes: 0
Received 0 Likes on 0 Posts
what kind of turbo does the cartech kit use? It could be surging...
Old 12-02-10, 11:23 AM
  #3  
Junior Member
Thread Starter
 
joshcartech's Avatar
 
Join Date: Sep 2009
Location: miami
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Turbonetic t04
Old 12-02-10, 11:23 AM
  #4  
Junior Member
Thread Starter
 
joshcartech's Avatar
 
Join Date: Sep 2009
Location: miami
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Turbonetic westgate also
Old 12-02-10, 01:23 PM
  #5  
rotorhead

iTrader: (3)
 
arghx's Avatar
 
Join Date: Aug 2004
Location: cold
Posts: 16,182
Received 429 Likes on 263 Posts
based on the video alone, it does sound similar to audible pinging/detonation. But normally it would be difficult to knock at part throttle and low boost. It could be some unrelated rattling, something that you would expect from an old car.

HOWEVER... those gauges look like 1st gen gauges. This is a turbo engine with a locked dizzy? Something could be way off with your timing. That pretty much never happens on an FD because it's 100% computer controlled and the crank angle sensor can't really be installed incorrectly. On an FC or 1st gen there are a lot more things to go wrong.
Old 12-02-10, 03:14 PM
  #6  
Rotary Freak

iTrader: (8)
 
rx72c's Avatar
 
Join Date: Jun 2003
Location: Australia
Posts: 2,800
Received 115 Likes on 65 Posts
100% detonation dont let it do that anymore
Old 12-02-10, 03:39 PM
  #7  
Junior Member
Thread Starter
 
joshcartech's Avatar
 
Join Date: Sep 2009
Location: miami
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
The engine is fresh rebuild like a month ago
Old 12-02-10, 04:04 PM
  #8  
Junior Member
Thread Starter
 
joshcartech's Avatar
 
Join Date: Sep 2009
Location: miami
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
My car never make that noise until I got the engine rebuild
you guys think he might it put non compatible components inside or this is normal
Old 12-02-10, 04:18 PM
  #9  
My job is to blow **** up

iTrader: (8)
 
lastphaseofthis's Avatar
 
Join Date: Jan 2005
Location: palmyra Indiana
Posts: 2,900
Received 3 Likes on 3 Posts
its TIMING. YOU GOT SOMETHING WRONG EXTRALLY. and internally soon. unless you just slapped a turbo on a 12a... seriously though... its knock too much timing/ not enough fuel. got a wideband? get one!
Old 12-02-10, 06:31 PM
  #10  
Junior Member
Thread Starter
 
joshcartech's Avatar
 
Join Date: Sep 2009
Location: miami
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
So what should be my next step get it tune?

Is a carbed turbo setup
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Machupicchu
1st Generation Specific (1979-1985)
8
08-17-15 08:27 PM



Quick Reply: 13b turbo nocking noise



All times are GMT -5. The time now is 11:03 AM.