I see alot of questions daily on fuel system issues. I did a little write up with pictures and video's demostrating some ways to troubleshoot fuel problems and thought I'd share it with you guys. Here it is. (link to outside site deleted)
Brent

 

great write up.

 

Awesome write up!

 

Thanks for sharing

Dan

 

awsome! thanks for making this write up

 

Great info, thanks a bunch! This helps me a lot.

 

Thanks guys. Just trying to give back a little to the rotary community. I know I've asked my fair share of questions over the years.

 

+1 This is great info!

 

hey if you do the ground /FP test and all you hear is a clicking sound... and i am certain that the fuel pump is not working... any chance that it might be a relay???

 

Oh well, my link to the write up was deleted by dgeesaman. No worries, I'm sure there are plenty of other good write up's about this on the forum and as long as members can find their answers, thats all that matters. If you have any fuel system related questions please feel free to ask and I will do my best to answer them. Just trying to help out the community. I would post the write up here, but my internet is extremely slow here in Afghanistan.

And for rosrex7, I would first replace the fuel pump since you say it is not working and go from there.

 

well i guess they could just put it back!!

 

ahahhh was just gonna check that out seems link is gone .
any reason?

 

It would great if you could copy/paste what you wrote and attached there to a thread in here.

It gets all political when linking to other forums, and in many cases attachments and stuff get lost or broken. If you post it here it will be maintained.

 

has anyone got the link for this...

 

I sent it to you. If anyone else would like it, please PM me. I would copy everything over, but it would take a ton of time doing all the photobucket and youtube stuff. My internet is very slow here, and what little time I do have when I finally get back to my little wooden room at the end of the day isn't going to be spent redoing the writeup. Not trying to get involved in any politics, just want to help if someone needs it.

 

just go to rotary car club.

 

My Problem is the car will only crank and wont start.. I sprayed some rfluid spray in to the intake while cranking and it fired right up but shortly died... the car did sit for a few months.. where is a good place to get a cheap /used pump just in case thats not the problem

 

i would say go will Ray at Malory Mazda or if your going aftermarket i would go with a reputable company.

you dont want to take a chance with your fuel system so ebay is out of the question.