I have 20b D series block with Xcessive LIM and Xcessive rails.

Can someone provide me part number for 1050x primary that will fit my D series block and ID2000 that will fit Xcessive LIM with Xcessive rails?

Tried e-mailing xcessive but no replies yet.

I think they are 14mm but they have different cap configurations that makes selection little dicey.

I also have Bosch style FIC 900cc injectors with caps and O-rings and what not... will these fit into the ID injectors? If then, I can just buy the universal ID injectors and reuse these.

Thank you.

 

From their website:
https://xcessivemanufacturing.com/ma...m-20b-6fr.html
https://xcessivemanufacturing.com/ma...m-20b-pfr.html

"The rail kit comes with the bolting hardware and stands to fit standard tall height 60MM Bosch type top feed injectors with 14mm o-rings."

Injector Dynamics Injectors

 

Nice man thank you.

I confirmed with them and just for the record, for Xcessive primary fuel rail with updated (shortened) standoff, you need 48mm O-ring to O-ring distance 14mm O-ring diameter injector. For their older standoff mount which had clearance issues, you need 60mm o-ring to o-ring distance with 14mm o-ring diameter. or just ask them to send you the updated mount and go with 48mm body length.

For the Xcessive LIM with Xcessive secondary fuel rail, you need 60mm o-ring to o-ring distance and 14mm o-ring diameter. The o-ring diameter applies to both top and bottom of the injector in both primary and secondary.