same

new pics

Still in on this , and glad to hear some feed back from Shine.

Anyone ever see this on a fd with the rear mud flaps on ? Just wondering if the diffuser could be trimed to fit around the flaps.

http://www.re-amemiya.co.jp/commodit...o/diffuser.jpg

https://www.rx7club.com/attachment.p...d=199148&stc=1

Both of these were posted earlier in the thread. Both have mud flaps if I'm not mistaken.

This one has some sort of aftermarket mud flaps or bumper add on..


This is my car and I put the stock mud guards on.

Sweet car herblenny! Damn!!!!

i second that, very nice :)

in this picture (and in a few others) it seems that the fins are slightly crooked.... anyone else notice that? i wonder if shine can "tweak" the diffuser at all. maybe its just an optical illusion, but check out a few other pics and tell me im not crazy.
https://www.rx7club.com/attachment.p...hmentid=227062

if i am not mistaken, but you would need to modify the diffuser in order to have the mudflaps on, correct?? is that what you had to do herblenny?

Wow this thread I started sure took off, looks like Shine owes me a free difusser! Just kiddin fellas.

I did notice a couple of crooked fins myself. I'll check it out in person....make measurements and we'll go from there.

Ken

thanks ken. it looks like someone at RE had a few drinks while making the mold :biggrin:

also (and im sure you wouldnt be able to answer this without seeing the piece in person) i was wondering if the fins themselves would be a solid piece or hollow in the middle. the reason i ask is that... while i really like the diffuser alot (and will buy it either way) i cant stand how the fins come down square and stop. they just dont seem to flow with the body... so after i got mine i wanted to shape the fins with a bit of an angle/rake downward... however if they will be hollow id second think my plan to try and change the fin shape. also, i imagine the possibility of doing this depends on what materials they are constructed from. :)

thanks, heath

hmm i just took a second look at the diffusers and i believe the "crooked fins" are an optical illusion... the side fins have are angled but the center two (for some reason) end in nearly straight 90's. its odd to me that they did this... maybe having everything the same bored them, or maybe they wanted to make it look more "racey" and have two longer straight fins in the middle (in my opinion they just dont extend far back enough to make that distinction, and end up making the diffuser look crooked). my hope was to shape the fins to look at bit more like this ;)
http://www.mercedes-benz.co.jp/slr/i...yling_rear.jpg

Is this going to be made in c/f or fiberglass? I assumed it was c/f, but every picture I've seen has been of fiberglass so far.

I think he can only answer that when he gets the diffuser, but for now he is sure it will be FG. It was never made in CF by anyone, FYI.

This one has more fins, and I think it would look good on the FD. I also like how it comforms to the body. If either of these "features" could be put into place that would be fantastic. Eitherway, I'm down 100%.

Thank you Sir!

Is this group buy still open??

It, technically, hasn't even started. ;)

1.) wptrx7
2.) XxMerlinxX
3.) snub disphenoid
4.) Noxlupus
5.) rx72nr
6.) buffdaddy1915
7.) ihavetwins
8.) spyder7892
9.) giampiero
10.) afomoto1978
11.) *rx007*
12.) bustadog
13.) RX-187
14.) rash_rvg (if it can be shipped to Europe )
15.) car hugger
16.) Silver_FD
17.) foursquarejibber
18.) ARMAN
19.) gracer7-rx7
20.) CYD
21.)JerryD680
22.) Paul_3rdgen
23.)93fd3s
24.)aoc007
25.)adictd2b00st
26.)rx7nam
27.)nuvolari
28.)trout2
29.)RotaryDreamz
30.)DDagman
31.)RotorMotor
32.)xenocide
33.) Iceman435
34.)Snaponbrian500hp
35.)FD3RotorTurbo
36.)RX7_Fanatic
37.)exmanos
38.)Killer Penguin
39.)neit_jnf
40.)Tian

anybody got any word on when this stuff should be ready ?

I have a genuine one that I would let go for a good price if someone were to meet me in Between Virginia Beach And DC. I'll also be up in philly for a week prety soon for work. PM me if interested. NO SHIPPING

THe box it will need will be roughly 60x36x10 if my memory is right.

Why not ship?

Ok. I have to touch bases with Treceb to see what he's been up to.