Feed Type II Spoiler
#101
Registered User
iTrader: (3)
Just a regular product. With the economy the way it is.. there is no point in fooling around with prices. If we can sell an item as a certain price... then we should always be able to sell that item at that price given every cost factor stays constant. For items made in the U.S.. I think our parts are priced very well.
the only reason why we took on this project because I was told that aerofiber was the only supplier of this spoiler and no longer supplied to community. If I had known Evo-R had this wing and was readily available the the quality was satisfactory.. I would not have taken on the project. There are other projects to take on and no point in supplying the demand if someone is already doing it. Its too late at this point. Mold is already done. I am looking to offer a good quality piece at a reasonable price range. Not looking to go into a price war as we will probably lose. I can only focus on quality , service, and speed as we know the rx7 in and out. Feel free to purchase from whomever you wish. I will let you guys know when this project is complete.
Ken
the only reason why we took on this project because I was told that aerofiber was the only supplier of this spoiler and no longer supplied to community. If I had known Evo-R had this wing and was readily available the the quality was satisfactory.. I would not have taken on the project. There are other projects to take on and no point in supplying the demand if someone is already doing it. Its too late at this point. Mold is already done. I am looking to offer a good quality piece at a reasonable price range. Not looking to go into a price war as we will probably lose. I can only focus on quality , service, and speed as we know the rx7 in and out. Feel free to purchase from whomever you wish. I will let you guys know when this project is complete.
Ken
#102
Donkey Puncher
iTrader: (16)
Join Date: Apr 2009
Location: Houston,Texas
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
#106
Senior Member
Join Date: Nov 2006
Location: Dallas TX
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Were you able to incorporate this improvement to the center-section end-plates?
Howard Coleman made new end plates to allow him to run the mid-section at a near-flat angle. Less drag on the street and it looked a lot cleaner. It would be great if you offered the extended range endplates.
Here's his post:
https://www.rx7club.com/showpost.php...&postcount=264
Here's his post:
https://www.rx7club.com/showpost.php...&postcount=264
#107
Registered User
iTrader: (11)
I'm not exactly sure what Howard Coleman did... Here is a quote from his post.
"i ordered a 12 X 12 piece of mirror polished T6061 aluminum 1/8 inch thick, used the original endplates as an outline and redrilled 7 new holes."
my question is.. why not just keep the original plate and drill more holes if more adjustability is a concern?
Ken
#109
Capoeira Centre Sul
iTrader: (23)
Join Date: Aug 2007
Location: South Gate
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
We kept the plates just like the original FEED wing.
I'm not exactly sure what Howard Coleman did... Here is a quote from his post.
"i ordered a 12 X 12 piece of mirror polished T6061 aluminum 1/8 inch thick, used the original endplates as an outline and redrilled 7 new holes."
my question is.. why not just keep the original plate and drill more holes if more adjustability is a concern?
Ken
I'm not exactly sure what Howard Coleman did... Here is a quote from his post.
"i ordered a 12 X 12 piece of mirror polished T6061 aluminum 1/8 inch thick, used the original endplates as an outline and redrilled 7 new holes."
my question is.. why not just keep the original plate and drill more holes if more adjustability is a concern?
Ken
i think he did it for the versatility of more options, but the main thing being the wing would sit flat aligned with the other pieces . i dont see why it wouldnt work just
drilling one more hole on that wing to make it sit flush.
and they are very well spoken.
#110
Racing Rotary Since 1983
iTrader: (6)
"why not just keep the original plate and drill more holes if more adjustability is a concern?"
the holes in the endplates on the two wings i had were so mis-aligned i elected to start from scratch. you are correct in that the original endplate (which i exactly duplicated in mirror aluminum) is quite capable of offering flat to max downforce. BTW, after 14 degrees you get much more drag than downforce pickup...
howard
the holes in the endplates on the two wings i had were so mis-aligned i elected to start from scratch. you are correct in that the original endplate (which i exactly duplicated in mirror aluminum) is quite capable of offering flat to max downforce. BTW, after 14 degrees you get much more drag than downforce pickup...
howard
#112
Comb the Desert!!!
iTrader: (18)
Damn you Shine for making me want to spend money!
Add me to the list:
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
Mike
Add me to the list:
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
Mike
#113
Capoeira Centre Sul
iTrader: (23)
Join Date: Aug 2007
Location: South Gate
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Damn you Shine for making me want to spend money!
Add me to the list:
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
Mike
Add me to the list:
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
Mike
got my wing back recently so i think hes just improving on the structural design now.
#114
Full Member
iTrader: (7)
Join Date: Feb 2010
Location: Lethbridge, Alberta, Canada
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
#115
Junior Member
Join Date: Aug 2010
Location: its a military thing
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
J$Balla;10302175]1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
9. Lamboorange frp with carbon center please
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
9. Lamboorange frp with carbon center please
#118
Shikkaku Dori
iTrader: (16)
$Balla;10302175]1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
9. Lamboorange frp with carbon center please
10 N3philum (FRP w/CF Center)
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
9. Lamboorange frp with carbon center please
10 N3philum (FRP w/CF Center)
#119
Lives on the Forum
iTrader: (126)
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
9. Lamboorange frp with carbon center please
10 N3philum (FRP w/CF Center)
11. Allrotor93 (FRP w/ CF Center)
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center or all FRP). 7. 1TxRx7 (FRP w/ CF center)
7. mrhetrick (FRP w/CF center or all FRP)
8. J$balla (FRP w/CF center)
9. Lamboorange frp with carbon center please
10 N3philum (FRP w/CF Center)
11. Allrotor93 (FRP w/ CF Center)
#120
On flats
iTrader: (29)
Join Date: Oct 2004
Location: Albuquerque
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
Just fixing the list:
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center).
7. 1TxRx7 (FRP w/ CF center)
8. mrhetrick (FRP w/CF center or all FRP)
9. J$balla (FRP w/CF center)
10. Lamboorange frp with carbon center please
11 N3philum (FRP w/CF Center)
12. Allrotor93 (FRP w/ CF Center)
1. KKMpunkrock2011 FRP w/ CF center or all FRP
2. e46m3smg
3. habu2
4. Laz93RX7 (FRP w/ CF center)
5. RX007CYM
6. calculon (FRP w/ CF center).
7. 1TxRx7 (FRP w/ CF center)
8. mrhetrick (FRP w/CF center or all FRP)
9. J$balla (FRP w/CF center)
10. Lamboorange frp with carbon center please
11 N3philum (FRP w/CF Center)
12. Allrotor93 (FRP w/ CF Center)