i finally started painting my car. these parts are so great to work with, those of you not doing it yourselves, your body guy will love you. almost too easy. should have some pics in the next few weeks. colors a little out there for some people so be ready.

 

did you take off the re bar in the front?

 

i did, but before i even had this bumper. it should work, i trimmed mine when i had a 99 bumper on for the lights. when i cut it up for my intercooler it left it pretty much useless as far as i saw it. but you should be able to use it with this bumper but it does need trimming to fit 99+ bumper lights.

 

7syawedis, do you have the side skirts installed also?

 

fully installed no, i had test fit them a couple times, right now one is painted. all should be together in the next couple weeks i hope. but i do have the sides.

 

Hey there,

Unfortunately, we cannot do that type of custom work. We're more of a manufacturing company than a custom body shop company. I'm sure they can be done by any body shop.


Im guessing there are quite a bit of you guys interested in the Sanai front fenders at the moment. Perhaps... give it another shot?

 

I would be down for a gb on them. Can we start a thread with info etc?

 

Does anyone have a picture of their door sills/jams. I can't quite figure out if i wanna rivet it in place there or use 3m tape. I want it to blend as much as possible, so i am thinking tape, but wanted to see what you guys are doing.


thanks.

 

It's about damn time you're putting the kit on Josh...sheesh. Although I'm not even close to putting mine on yet hahaha. Let me know what you end up doing cause I think I'm gonna put my kit on before I deploy again. And let me know when you and Rob are coming out to visit haha.

 

well i was on eof the first to get this, its been what almost 2 years or something? and its just now going on.

 

^Yeah I feel ya man. I haven't even started putting mine on yet, but now I'm excited. Oh and I got some of the Enkei's in 10.5 +15 like you have/had, I love them!

 

they are cool. i have some other wheels im finally geting tires on tomorrow im putting on. for my stuff i just have to put on the L sideskirt and bumper. im holding off on the bumper i need to build a ramp or just redo my sidewalk so i can get my car out. the front bumper sits like a inch, maybe less off the ground

i have to get the weatherstripping on my hatch so i can put the spoiler on finally. i got some doublesided tape today, and it does work awesome holding the sides on. i just used that and zip ties on the ends and its solid, so tape is great.

 

^Yeah I saw what you said in the other thread about not being able to make it out of your driveway hahaha. What part of CO are you in? We're getting together a pretty good group of FDs here in the Springs. And we go up to Denver every now and then for meets or drives. Maybe we can all get together sometime.

So tape works well huh? That's cool, now I know.

 

in in se denver, there might be one more meet put together this year i need to get done and maybe go. i know back in the day a coupe springs people came up for our meets

 

not even done out of doublesided tape

sides and rear are fully attached at least. ihave the burnout rear for anyone who doesnt know. it goes well with this kit, the add ons werent quite enough for me

 

the last picture makes it look like its in mid transformation...
transformers robots in disguise

 

^Haha, yeah it does hahaha.

It looks good man. I've actually never been to any rotary meets up there other than one with CMZC, but I went on the last drive through the mountains that Mike B put together, a couple months ago. I plan on going to the car show on Sept 20th though.

 

Crazy, we have the same bodykit yet the car looks so different.

 

one for this thread. still havnt permenantly attached the front, i need to do my oil cooler like this weekend, i DID get out of the driveway wo bumper and theose kaid without breaking anything, when i put these on the front i dod raise it about a 1/4 inch i got massive rubbing when i was driving it that was the ride height i was using for 17s i just went to 18s and left it\ so it needed adjusting i guess....
i will be building my driveway ramp im hoping to get someone to take decent pics pretty soon.

 

^Looks good man! Are you going to be at the Sonic meet this next Sunday? I'm trying to make it up there but my car has been at the tuner's giving me problems since last Monday so we'll see, haha. I'd love to see your car in person.

 

i havnt registered it in over 2 years so no. if we had it in my neighborhood ive been crusiing around in there

 

^ Well get on it dude! Haha.

 

 

Car looks amazing.

 

im really interested in this kit, but im more interested in the burnout front bumper. shineauto said he seen one guy do this combination and I was wondering if anyone knows who he and possibly link me to his car thanks