FD3S: Low Profile Spoiler ! It's about freakin' time.
#351
Shine, you guys probably already saw this, but this is the attain wing:
http://www.rhdjapan.com/jdm/Attain-R...3S-RX-7-54640#
little expensive
http://www.rhdjapan.com/jdm/Attain-R...3S-RX-7-54640#
little expensive
#359
Alright guys. We're already shipping these out. If you left a deposit, let's finish off the balance and get these bad boys on some FD's.
I'll take orders with full payment, but there will be a wait time depending on the line.
We can only produce 2-3 per week.
Ken
I'll take orders with full payment, but there will be a wait time depending on the line.
We can only produce 2-3 per week.
Ken
#369
Wow!!
IMHO you've built the most tastefully modified RX7 I've yet seen. I went to your homepage, which apparently is still under construction, but how can I contact you directly? Please let me know. Thanks, Jon
#374
Here's a quick review.
1. The wing attaches only to the taillights with 3m double-sided tape. 3m double-sided tape is fairly strong.
2. The wing is produced both in FRP (fiberglass) and Carbon Fiber. You have a choice between Twill Weave and Plain Weave Carbon. Bottom side where attachment is is made in FRP.
3. You can now order these wings. First come first serve. We can only produce 2-3 per week. As soon as we're done with yours, we'll ship it out. The longer the line, the longer it will take for yours to get shipped out, so if you want it soon ... call us .
Price:
FRP $200
Carbon $350
Shipping is $50 to the lower 48 states.
1. The wing attaches only to the taillights with 3m double-sided tape. 3m double-sided tape is fairly strong.
2. The wing is produced both in FRP (fiberglass) and Carbon Fiber. You have a choice between Twill Weave and Plain Weave Carbon. Bottom side where attachment is is made in FRP.
3. You can now order these wings. First come first serve. We can only produce 2-3 per week. As soon as we're done with yours, we'll ship it out. The longer the line, the longer it will take for yours to get shipped out, so if you want it soon ... call us .
Price:
FRP $200
Carbon $350
Shipping is $50 to the lower 48 states.
#375
Tanabe USA is the main distributor for SSR products. Unfortunately, they rare stock these, but I believe you can order from them and wait.
I believe Driftspeed might carry a few in stock, but if you want specific offsets, its best to order and wait.
These are:
19x11 +23 in the rear
19x9.5 +30 in the front
My fronts sink in way too much, so I will have to run a spacer. If I was to order new, I might shoot for 19x9.5 +15 or go with 18x9.5 +15 non-step-lip. The face of the wheel will be the same size as the 19's.