I'm interested in buying the feed replica fenders.

 

18x9.5 +15 will fit no problem in the front but you're gonna have to force the wiring harness that runs through the wheelwell all the way up as high as it'll go. If you dont force it up the wheel will tear up about 8 wires in that harness. I did this twice with my Work Emotion CRs and that was with stretched tires.

You can probably even go with a lower offset than +15 in the rear, probably get away with +0 or +5. Ask Ken, he should know.

 

thanks, i ended up changing up my wheel options. going with vs-xx
Front : 18x9.5 +15
Rear : 18x10.5 +7

 

how much do the frp sides go for now a days?

 

Looking at Shine's website, seems $475 is the asking price for FRP.

Mike

 

finally got some kicks for her

 

volks, yum
now how about posting some non-shitty, non-hdr pictures?

 

actually they are work vs-xx

 

I knew what I meant, didn't you?

 

sux when that backfires on you huh?

 

happens too often it seems.

 

they are not volk, and that is not HDR. it is off camera flash with multiple strobes, fired wirelessly. since it is one photo, and one single exposure, it is far from hdr. and since you obviously dont know **** you are talking about, i wont take offense to the "shitty" comment.

edit: while im at it, im not even rotary. im ls2 swapped, you dont have to like me, its ok

 

alright ladies simmer down, there was no need to further anything

 

full of win lmao

 

What are you getting next dee?

 

feed fenders, hood and sides. i didnt go rear fender addons but i got them rolled kinda like ken has them.

Uploaded with ImageShack.us

the rear is a little off but luckily im getting them re-barreled to 19x10.5 +7 in the rear and the front to 19x9.5 +15



Uploaded with ImageShack.us

 

probably the same haha... but this time i'm going to stretch!

18x10 0
18x12 +7 (tried -3 and it poked just a little too much so +7 will be perfectly flush)

 

I really like the rolled and pulled look on the rear fenders.

 

Any deals going on soon? im struggling right now but im hoping to buy the front bumper, fenders, cf sidesteps, and rear fenders.. any deals when you buy all ?

pm me the price shipped to 03815

thank you,
pat

 

^

Also curious to know if there might be any deals. Maybe a Christmas "sale", perhaps?

Mike

 

^^ yes, I pmed shine and asked the same question. I am definately in for some christmas deals.

 

Just email me and I'll give you guys a discount if the order is a decent size .

For the front fenders, you probably don't want to go anything lower than a 9.5 +15 and you can run 285/30.

Ken

 

This is probably a well debated theme, but if anyone has a linkto a topic about it or a good answer...
What are the best rim/tyre demensions on a fd with standard fenders...
I want 18" rimsbut not sure about the offset.
i'v tried 18"x9,5 45 offset but those rubb inside the front fenders. but they look good with the car lowerd..

Also.. how does the metalin the rear fenders react to beeing streched... like ken's?

 

I'm curious about something...the side steps, are the supposed to be "cut" underneath and not go all the way around? Like "empty" or something?

 

i have 17x9.5 +15 on the front of my fd 225/45 tires. you need to trim the fenders liners or they will always rub, i trimmed instead of completely removing them because i still daily the car and i dont need dirt getting near my turbo.

the splash gaurds have to be seperated and cut down the middle so it still blocks off the engine bay but gets rid of evrything you dont need, the liner is doubled up at the top, i still run a single layer up there but tire used to rub beside the oil coolers. other then that, the tires usually dont rub on the fenders themselves daily driving, and im slammed - but the front tire smokes when im at full-lock drifting. so cool leaves bits of rubber all over my windshield.