FC3S: Vent-less FRP wide fenders
#426
Rotary Freak
Join Date: Apr 2004
Location: Rochester, NY
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
yeah that does kinda suck that they arent as beefy wide as you hoped but at least you got wheels with a high enough offset that you can play around with moving it inward. good luck on the setup, are those new volks they look sick! (superlight yes yes)
#435
the implications matter
iTrader: (1)
Join Date: Dec 2005
Location: Tustin, CA
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
More pics from my install:
Front fender linings trimmed and relocated. The 15 mm arch drop of the Foresight/Shine fenders really helps in having this land nicely because the liner rolls down and out if you pivot it about the bottom edge. It took a lot of shaving to fit right but came out clean so I’m happy.
Bolts relocated
Staples relocated (note this is built in two pieces and the seam is stapled. I only altered the outer portion of the liner)
Nice and tight to the lip (which I already shaved down to about a ¼” during install)
9mm spacers (total front offset +26)
~3mm clear to the coilover (255/40r17 tires on 17x9 wheels)
Final stance
Front fender linings trimmed and relocated. The 15 mm arch drop of the Foresight/Shine fenders really helps in having this land nicely because the liner rolls down and out if you pivot it about the bottom edge. It took a lot of shaving to fit right but came out clean so I’m happy.
Bolts relocated
Staples relocated (note this is built in two pieces and the seam is stapled. I only altered the outer portion of the liner)
Nice and tight to the lip (which I already shaved down to about a ¼” during install)
9mm spacers (total front offset +26)
~3mm clear to the coilover (255/40r17 tires on 17x9 wheels)
Final stance
#441
Senior Member
Join Date: Oct 2006
Location: Colorado
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
yes. not painted yet though.
18x10 +11 with 1/4 inch spacer. 235/30R18 (not 40). I had 15mm spacer before but had issues with turning to full lock with all the vert's extra bracing.... haha.
#449
This thread and the first batch of pictures in the thread have an OEM skirt by the looks of it.Pics aren't focused on the skirt/fender area but looks to fit decent with one pic showing a fairly small gap where the skirt wraps around the wheel well opening at the top molding area. Doesn't look like a issue,depending on how picky you are in fitment.
https://www.rx7club.com/shineautoproject-161/my-car-shine-auto-parts-763161/