Here is a pm that another forum member sent to me
Screamer: hi there, i have these fitted to my fc2000 bodykit
they are available from
http://www.busters-accessories.co.uk...asp?prod=56466,
cost $35

 

singleboy3: As far as HID are concerned I believe Hellas makes some sort of kit of HID but the fitment on the actually light to housing is a bit off (Hellas = 90mm, housing = 110mm) I do also believe PIAA makes something similar to what I'm running which is the 520 SMR series but in a HID variant. As far as the turn signals are concerned I really have no idea what the part number or the actual size of the turn signal hole but I think you might be able to find something on ebay that would work with minor modifications to the wiring harness...My suggestion is do a search for snyper-7 and see if you can find the website of his build and I think he might have at least a picture of what I'm trying to describe.

 

linky on worky

 

http://www.busters-accessories.co.uk...asp?prod=56466

 

Sweet, only $123 shipped to the US. Um, no thanks.

 

Hey guys,
Sorry for the lag in trying to get pics but the car is still getting the fog lights installed and some other work done. I found these that might be good for turn signals. I'm gonna test fit them in the morning and I'll post pics of how that goes but most likely it'll need a lil bracket of some sort to hold it in place. Maybe this might be a cheaper solution for some of you guys. BTW these lights are for sale so check my thread in the west section for sale if you're interested.
https://www.rx7club.com/showthread.php?t=739617

Bulb version



Wedge version

 

This is the route I think I am going. Just $5.99 each from any old truck stop. I may retrofit it so it accepts LCD's. Requires a little creative installation but should end up looking very factory RE.

 

My brake cooling project...

Detmar NASCAR auxilary fans mount directly into the lower 4" opening then I'm running 3" hi-temp silicone hose back to custom backing plates on each spindle/rotor. When I'm on a track that is more abusive than average on the brakes I'll throw a switch during or after a session to assist in keeping the temps down...

 

^ great ideas man.

as for the indicator lights...what do u mean get them from a truckstop?

 

I picked them up at a Pilot in Georgia which like other truck stops has a small department of truck parts. In Ontario you might get lucky at any of the Fifth Wheel locations.

 

Look's like an illuminated orange stuck in there or one of these ancient christmas tree bulbs.

 

And yet remarkably like the original...

 

Are these the same or very similar lights to what you used?

http://cgi.ebay.com/ebaymotors/PIAA-...spagenameZWD1V

 

Those look more like off-road application lights... Maybe someone using PIAA's will chime in.

 

Those are the same lights I used but the covers are removable so I just removed those and they fit like a glove...or at least better then hellas.

 

Hey guys,

just letting you guys know that i should find some time this week to head to my buddy's machine shop with my ORIGINAL RE-A FC2K lights and try to get them fabbed up. I've been wanting to help y'all out for a while now but just tied down to my desk.

i'm also going to make the GT Wing support brackets for the FC. woot woot......

TTY soon,

Rishie

 

i want this kit but i gotta figure this light thing out lol fabricating a mount sounds like it would suck :\....

 

ITS NOT THAT DIFFICULT TO PREFAB THE BACK PLATES FOR THE "HELLA 90mm
LIGHTS, THERE ARE MANY IDEAS AND WEB SITES TO GAIN THE KNOWLEDGE
TRY, www, snyper.net,
IF YOU ARE DOING THE WORK YOURSELF THE FUN BEGINS WHEN YOU HAVE
TO STRIP ALL THE POP-UPS , & MOTORS, ETC, BEFORE YOU CAN BEGIN THINKING
OF INSTALLING THE BODYKIT
DIDNT YOU AMERICANS PUT THE FIRST MAN ON THE MOON ??
EVERYTHING IN LIFE TAKES TIME

 

Wow, that does look nice homie.

 

lol i am taking my time :P i gotta get my fc running first then comes the kit and all but i'ma do the front bumper and light conversion first so just trying to start looking into it so that when i get there i have an idea of what i am taking on. and yeah i saw the hella mounts and i think thats what i would get would be two high two low and then the indicator from the sight listed above

 

oh man...when will you have time to do this? i'll take 1 of each please

 

Quick question - what are you guys using for the headlight cover? The bumper I got (used) did not come with the clear plastic/lexan cover over the headlights.

Any ideas where I can get a pair?

 

yeah go to Lowes and cut ur self one

 

Well yea, but I figure with the number of these kits out there someone is selling them...

 

Contact Ken at Shine...he should still have the headlight covers