well i live 15 mins north of nashville
|
Well I did not look at the mapquest but quickest way is to take 53 (exit 1 or 2). Its the Ardmore exit. 53 turns into jordan lane and the dyno is off jordan once you get into huntsville.
|
Off topic.... But had fun last night Don.. I already forgot the other guys name (Chris)? Sorry about almost running you over!!!!!!!! My log showed 9750rpms! How much boost were you on?
|
That was pretty fun. Hope Chris can drum up some more rotary guys for the next roll out. My commander showed .78 but AFR hit 9's and it felt like I hit fuel cut, bogged down pretty bad at WOT.
|
I read tony (supra) ran the skyline later on... I was under the impression the skyline was slow.. Maybe it was just the shity paint job that thru me off. I guess after we left they went to another location but the mustang boys on trailers were a no show.
Yeah, it was fun but dont think I can do that too often.... I will stick to the track. |
the R32 skyline just has the stock rb20det in it with stock turbo. I put an avc-r in it and fixed a bunch of wiring. It is quick but not fast. I just finished another RB25 swap and I think the Skyline owners want to go with the 25 now. I am just finshing up some small details on the REW second gen and she will be ready. I am going to paypal ray the deposit probably tomorrow. I was about to come out there last night but got caught up working.
Dustin |
yeah, I just read were they were bullshitting about the skyline. The only car it beat all night was a cobalt ss.. Thats about what I thought based on the driver and the paint..LOL....
I had fun. But I am too scared to race on the street anymore and dont really care to watch Honda after honda race..... Track opens Feb. 21st. So after Rays tune if all is well you know were I will be every weekend.. |
Mike, I was curious if you would have a chance to do a base map on this FC for the time being. I have it running off the oem computer but it needs the dwell time change on the pfc and timing taken out a little to make it streetable till dyno day. I have the stock 550 850 in her now until ray gets here. Let me know.
Thanks, Dustin |
i bet I have a map that you could just load in for the time... Let me dig around.
|
boost_its_what_for_dinner , hows the map working for you?
sk8world, do we have times set up yet? Thanks, Steve |
if Ray does not put up a schedule this week I will phone him and take care of it. We would like to get as many cars completed on Friday. There are 1-2 that can not be there until saturday.
|
im for saturday anytime is fine but just need to know a time so i get a plan made out for the haul.
estevan- i found out that i had to move this weekend so ive been moving and working and with jacking wifi were i can, but i havent loaded the map yet i will prolly do so this saturday and let you know whats up. i just hope i dont have any issues... everything is working fine but you know how things go and my luck. but cant wait to meet all of you and see some really nice rx7s |
Deposit sent. Sorry got busy and forgot. Probably need 15psi pump gas tune on the to4b hybrid.
Thanks, Dustin |
Tenitive schedule. I am giving every car 2 hour windows. But I expect some to go longer and other shorter. I think its a good idea if you guys can arrive several hours before hand incase we get ahead of schedule. Also if a car gets on the dyno and runs into issues we will skip it and start on the next car.
2-27-09 10:30 sk8world 12:30 lunch 1pm HDP 3pm Steven 5pm Doc-1 Dyno needs to close at 6pm but I am going to ask otherwise. If Doc's car is not complete and we have to leave he will be first back on Sat. 2-28-09 7am BoostedFDs3 9am Dustinali 11am Wes. 1pm we leave for airport |
to the guy that contacted me about being added on. You are more than welcome to sign up as first reserve. You could show up and hang out and see how it goes. I bet you could sqeeze in but no promises.... Let me know...
|
Originally Posted by sk8world
(Post 8959928)
Tenitive schedule. I am giving every car 2 hour windows. But I expect some to go longer and other shorter. I think its a good idea if you guys can arrive several hours before hand incase we get ahead of schedule. Also if a car gets on the dyno and runs into issues we will skip it and start on the next car.
2-27-09 10:30 sk8world 12:30 lunch 1pm HDP 3pm Steven 5pm Doc-1 Dyno needs to close at 6pm but I am going to ask otherwise. If Doc's car is not complete and we have to leave he will be first back on Sat. 2-28-09 7am BoostedFDs3 9am Dustinali 11am Wes. 1pm we leave for airport |
I can switch with don no problem if need be. Let me know.
Dustin |
3pm is great for me!
I'll be at the dyno around 1pm so i can watch some of the cars get dynoed. |
2-27-09
10:30 sk8world 12:30 lunch 1pm Dustin 3pm Steven 5pm Doc-1 2-28-09 7am BoostedFDs3 9am Don 11am Wes. |
man the other night was the first time ive seen a rotary in a looong time lol (well besides everyday i walk in the back yard.... or... step into the garage.....)
but i meant on the streets! lol there is alot of anticipation for the track to open, as you can tell by the MASSIVE turn out of street racers. well i hope to run the rx3 at the drag strip this year some time. 2200lbs and 210hp TII motor should be fun, but ppl would be expecting more cause of the cage lol. still just waiting on my brother to wire it up.... oh and a bov... anyone got a aftermarket bov laying around? not a fleabay kind? |
Originally Posted by sk8world
(Post 8961186)
2-27-09
10:30 sk8world 12:30 lunch 1pm Dustin 3pm Steven 5pm Doc-1 2-28-09 7am BoostedFDs3 9am Don 11am Wes. Mike, I was hoping I could keep the same day, just a later time... EDIT: nevermind, Saturday will work... |
Don, I bet you can still get in friday. Ray really wants to get as many completed Friday as possible. I emailed Arthur asking if we can get the dyno to stay open later in the night. 8-9pm would be great. I suggest just coming bay and seing were everything is.
Gilgamesh, good seeing you out there... Swing by that weekend if you like. Otherwise I dont want a crowd there. |
HEY! its chris! whats going on... sorry I have had a crazy week. I'm tryin to get a few RX-7 guys to meet at O-Riley's on friday. I don't know if any will really show or not. I had a pretty good time cruisin around on saturday (sorry I kinda led the wrong way for a bit though...) anyways... hope to see you out there friday night!
P.S. any body have an idea on how much an old Nikki is worth? (thats the stock carb on a first gen) |
Originally Posted by RiderX
(Post 8964692)
HEY! its chris! whats going on... sorry I have had a crazy week. I'm tryin to get a few RX-7 guys to meet at O-Riley's on friday. I don't know if any will really show or not. I had a pretty good time cruisin around on saturday (sorry I kinda led the wrong way for a bit though...) anyways... hope to see you out there friday night!
P.S. any body have an idea on how much an old Nikki is worth? (thats the stock carb on a first gen) if you can get anything out of a 12a carb your doin good. lol |
Originally Posted by RiderX
(Post 8964692)
HEY! its chris! whats going on... sorry I have had a crazy week. I'm tryin to get a few RX-7 guys to meet at O-Riley's on friday. I don't know if any will really show or not. I had a pretty good time cruisin around on saturday (sorry I kinda led the wrong way for a bit though...) anyways... hope to see you out there friday night!
P.S. any body have an idea on how much an old Nikki is worth? (thats the stock carb on a first gen) What's up Chris. Glad you could make it here. I'm sure not much went on last night because of the rain, so I guess we didn't miss much. For that carburetor, you might want to check the 1st gen section to get a better idea of the value. EDIT: I sent you a PM of another rotary website you should check out. |
Fellas,
I'm getting excited about this tuning! I got everything today for my tune up. Plugs, wires, oil and filter, fuel filter. I also got a Tial 14psi wastegate spring i'm putting on. Can't wait! Steve |
I checked out the first gen section and i didn't really see anything. Nothing really happened last night... some guy tryed to show out in the parking lot and lost control and almost trashed two cars. When that happened I left.
|
hey does any one have time to duplicate their tps bracket? i have a s4 tb with haltech tps . something is wrong with my setup on my tps its to bouncy i have recalibrated it many time but it seems to be bound up or something cause it will stick around 13% then i bump the gas and it will go back to .4% but sticky reading per haltech data page? willing to pay for bracket i just need one that will work, i think thats whats wrong with my driveability and the flucuating afrs/bucking problem.
thanks |
Originally Posted by boost_its_what_for_dinner
(Post 8966466)
hey does any one have time to duplicate their tps bracket? i have a s4 tb with haltech tps . something is wrong with my setup on my tps its to bouncy i have recalibrated it many time but it seems to be bound up or something cause it will stick around 13% then i bump the gas and it will go back to .4% but sticky reading per haltech data page? willing to pay for bracket i just need one that will work, i think thats whats wrong with my driveability and the flucuating afrs/bucking problem.
thanks Why not just order a new one from Malloy Mazda? Ray Crowe can have it shipped to you in a matter of days. |
wow, i drove by last night kinda early, but im goin to come out tonigt. hopefully there should be more than Chris and i. but only time will tell.
|
Originally Posted by Violent Gravy
(Post 8968004)
wow, i drove by last night kinda early, but im goin to come out tonigt. hopefully there should be more than Chris and i. but only time will tell.
I'm down till at least the next Monday. Car is in pieces at the moment. |
Originally Posted by HDP
(Post 8967730)
Why not just order a new one from Malloy Mazda? Ray Crowe can have it shipped to you in a matter of days.
didnt know about them having the brackets... will check out asap edit- just went to the site and dont see anything about a rx7?? so are you talking about the haltech tps bracket or a stock one |
Whats up with the fd don? Let me know if you need another set of hands or parts.
Dustin |
Originally Posted by boost_its_what_for_dinner
(Post 8966466)
hey does any one have time to duplicate their tps bracket? i have a s4 tb with haltech tps . something is wrong with my setup on my tps its to bouncy i have recalibrated it many time but it seems to be bound up or something cause it will stick around 13% then i bump the gas and it will go back to .4% but sticky reading per haltech data page? willing to pay for bracket i just need one that will work, i think thats whats wrong with my driveability and the flucuating afrs/bucking problem.
thanks ^sorry I dont have one. If seach though the forum youll find a write up on how to make one. Steve |
sk8world...you mentioned that you could bring race fuel...what would you be charging for them??
|
I think the dyno might have some c16 or sunoco 110. I will check. I am also considering changing dynos as I am afraid we might run into time restraints. Trackmasters will not stay past 6pm. Were the other dyno will most likely stay as late as I ask. They also may be a tad cheaper....
What kind of fuel do you want? I can let you call R&R speed shop here in town, pay for a 5 gallon can and swing by and pick it up?? If you run q16 it needs to be bought in the VP can not opened until you are ready. Dustin, any luck on the car after I left? I can swing back by this week. I had a 2pm meeting and had to go.. Sorry.... |
Anyone coming to this from Murfreesboro, TN??
|
im coming from hendersonville
|
Originally Posted by boost_its_what_for_dinner
(Post 8969594)
didnt know about them having the brackets... will check out asap
edit- just went to the site and dont see anything about a rx7?? so are you talking about the haltech tps bracket or a stock one |
Update:
Due to the time restraints at Trackmasters we are moving this to another dyno shop in town. Static X performance shop in Madison AL. This is going to be on a dyno dynamics. I personally like this machine better as you can apply load that is more like the real thing. Also it seems to help spool the turbos quicker.. This is a really sweat set up. Not to mention I got the dyno rate down to $90 hour... (Feel free to buy me lunch)! So now with that said we can tune well into the night. I need to adjust the slots a tad here so if there is any issues please let me know asap. Also if you have another interested we now can slip in a couple more.. 2-27-09 10:30 sk8world 12:30 lunch 1pm Dustin 3pm Steven 5pm Doc-1 7pm Don 9pm possible another slot if Ray is not beat 2-28-09 7am BoostedFDs3 9am Wes. 11 noon?? maybe lunch 1pm we leave for airport http://www.staticxmotorsports.com/ http://www.mapquest.com/maps?name=St...SS&id=42769321 my car there a few years back:: http://www.youtube.com/watch?v=szhjj...e=channel_page |
Also, Robert, the owner said if any one needs race gas he can order it and have it there waiting for you. Very nice and helpful guy..
|
Well, you know what type I will need so find out if he can get that and the price.
|
http://www.mapquest.com/maps?city=At...::r::25:::::/e
Stocks VP gas but I called for you and they do not have Q16 just C16. I also caled R&R and same deal. My suggestion is call Robert and get him to order it for you or go online and check it out. |
Just spoke to VP and they said they are trying to schedule a truck for Huntsville next week. So I would call RR and ask them about that. Otherwise you will need to just order it from them and pay $25 in shipping. 5 gallons is usually around $75.
|
Please let me know that you have read the above changes and have the correct info.
Thanks |
Originally Posted by sk8world
(Post 8974313)
Update:
Due to the time restraints at Trackmasters we are moving this to another dyno shop in town. Static X performance shop in Madison AL. This is going to be on a dyno dynamics. I personally like this machine better as you can apply load that is more like the real thing. Also it seems to help spool the turbos quicker.. This is a really sweat set up. Not to mention I got the dyno rate down to $90 hour... (Feel free to buy me lunch)! So now with that said we can tune well into the night. I need to adjust the slots a tad here so if there is any issues please let me know asap. Also if you have another interested we now can slip in a couple more.. 2-27-09 10:30 sk8world 12:30 lunch 1pm Dustin 3pm Steven 5pm Doc-1 7pm Don 9pm possible another slot if Ray is not beat 2-28-09 7am BoostedFDs3 9am Wes. 11 noon?? maybe lunch 1pm we leave for airport http://www.staticxmotorsports.com/ http://www.mapquest.com/maps?name=St...SS&id=42769321 my car there a few years back:: http://www.youtube.com/watch?v=szhjj...e=channel_page ^ Sounds good and a better dyno rate too!! Thanks! |
hell yeah gives me some time if any gremlins need to be slapped out
great job sk8 ill buy you lunch. |
I can eat $50 in sushi...LOL..
If wes or boostedfds3 wants to move to Friday night let me know...Have to make sure RAy is ok with that. Oh, I just talked with the dyno shop again and they have a video set up to film all pulls, so you can get a copy of it. Not sure if they charge for this but I thought that was pretty neat. |
i cannot move to friday. but I guess about the race fuel, I'll just bring some. SOoooo excited!!
|
ok. keeping you on saturday.
|
All times are GMT -5. The time now is 01:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands