Tune
Ok, sounds great.
I would really like to get in on the 27th if he tunes then. I'll be driving up from Biloxi and it would be perfect for me. When and how does Ray want the deposit? and how much of a deposit? Ready and waiting for this tune! Thanks for setting this up. Steve |
mike how much is the deposit. I need to send him money for one car right now for sure.
|
i'm in for the 28th b/c i'll be coming there on the 27th. To where do I make the deposit?
Bridgeport, Turbonetics GTK1000, Power FC, 850primary/1600 secondary, walboro fuel pump and supporting mods. Looking for 25psi max or 550whp. Pump gas with Devil's Own water injection. Going to be running Devil's own methanol(49%)/water(51%) mix. |
I was going to let Ray say were and how much of a deposit he needs. If he does not answer on here soon I will take the deposits to my paypal account.
Steve, As far as the 27th goes lets wait and see. Once the tickets are purchased I will have a better idea of were to place cars being tuned. Ray did ask me to have the info posted on each car so he has an idea of how much time to allow . 1. Sk8world Streetport- gt4094 -PFC- pump gas and race gas mucho boost 2. HPD Stock port -99twins-PFC-pump gas and race gas 3. Doc-1 stock port-99twins-PFC-pump gas 4. Dustinali 5. boostedFD3s 6. somchhir1 7. estevan streetport |
1994 R2 90.xxx on the car
Pump Gas Rebuilt Stock Engine 3K miles on it new 99 spec turobs Mazdaspeed intercooler Full 3 inch Exhaust with high flow cat, Racing Beat dual tip FC with Data Logic Issues have boost spikes of 12 PSI because of the exhaust Objective.....To tune the car for everyday driving and to have a safe AFR at full throttle with the 12 PSI spikes Where and when do we send the deposit..Anytime is good, 27 would be nice |
Info For My Tune
Brand New OEM Engine; not a reman, not a rebuild (now about 5000 miles)
HKS Twinpower HKS DP Resonated MP Cat-back Intake 99 Spec RZ Twins (Sequential) Apexi 3 Bar Map Sensor medium-size SMIC Apexi PFC, Commander, & Datalogit Walbro 255 Fuel Pump Areomotive FPR 850cc/1200cc injectors BUR9EQP spark plugs (x4) LC-1 Wideband Greddy Profec Type-S boost controller ... think that's all the important info. I would really like to utilize both boost settings (low and high) on my Greddy controller. Would it be possible to tune to the safest maximum boost on pump gas for the low setting and boost beyond that on race fuel for the high setting? My goal is to have a very streetable 400 whp and a smooth low RPM cruiser. |
Steve's setup
It's a 84 GSL-SE S5 TII med size streetport w/2k miles FD UIM and throttle body 3 Bar Map Sensor GT35R turbo .82 hotside Greddy FC turbo manifold 46mm Tial wastegate w/13psi spring 800/1600 injectors Aeromotive FPR Walbro 255 BUR9EQP spark plugs (x4) Med size intercooler 3" exhaust 4" K&N Air filter ACT SS clutch Haltech E6X EMS Thats about it. Looking for 13psi tune on 93 pump gas for daily driving. Wanting around 300-350hp with my setup. If it does better than thats great too Steve |
Originally Posted by BoostedFd3s
(Post 8916763)
i'm in for the 28th b/c i'll be coming there on the 27th. To where do I make the deposit?
Bridgeport, Turbonetics GTK1000, Power FC, 850primary/1600 secondary, walboro fuel pump and supporting mods. Looking for 25psi max or 550whp. Pump gas with Devil's Own water injection. Going to be running Devil's own methanol(49%)/water(51%) mix. Is that one pump up to the task? |
Tuning
Hey Guys,
I'm going to fly into HSV on Feb. 27th. mid afternoon, and will be leaving the evening of the 28th. Here are some general tuning cost figures. $350 - Stock Turbo up to 12psi of boost (pump gas only) 1 map $400 - Single Turbo up to 15psi of boost (pump gas only) 1 map $450 - Single Turbo from 16psi - 23psi of boost (race gas and/or auxiliary injection only) 1 map $600 -Single Turbo high boost 23-40psi of boost (race gas map and pump gas mapping) 2 maps This is only the cost for the tuning and does not include the dyno rental time. On all tuning sessions there is a Non-refundable $200 deposit. I will bring some basic tools, but please keep in mind that we have a limited amount of time to work with. If your tuning session becomes more of a repair session we will have to move on to the next car, so please go over the basics on your car (spark plugs, oil, fuel filters, boost controller etc..) If we run out of time on the 28th, and your car does not make it into the tuning session I will refund your deposit. We need a minimum of 6 cars for this to happen. Please send your deposit via Paypal to raydwilson@aol.com With your deposit please include all of your contact information, also list vehicle mods and what your target goals are. -Ray |
Deposit Sent!!
|
Deposit sent to your paypal
|
Originally Posted by sk8world
(Post 8917474)
Is that one pump up to the task?
gonna run dual walboros |
Originally Posted by forcefed7
(Post 8917911)
Hey Guys,
I'm going to fly into HSV on Feb. 27th. mid afternoon, and will be leaving the evening of the 28th. Here are some general tuning cost figures. $350 - Stock Turbo up to 12psi of boost (pump gas only) 1 map $400 - Single Turbo up to 15psi of boost (pump gas only) 1 map $450 - Single Turbo from 16psi - 23psi of boost (race gas and/or auxiliary injection only) 1 map $600 -Single Turbo high boost 23-40psi of boost (race gas map and pump gas mapping) 2 maps This is only the cost for the tuning and does not include the dyno rental time. On all tuning sessions there is a Non-refundable $200 deposit. I will bring some basic tools, but please keep in mind that we have a limited amount of time to work with. If your tuning session becomes more of a repair session we will have to move on to the next car, so please go over the basics on your car (spark plugs, oil, fuel filters, boost controller etc..) If we run out of time on the 28th, and your car does not make it into the tuning session I will refund your deposit. We need a minimum of 6 cars for this to happen. Please send your deposit via Paypal to raydwilson@aol.com With your deposit please include all of your contact information, also list vehicle mods and what your target goals are. -Ray |
Originally Posted by BoostedFd3s
(Post 8919389)
gonna run dual walboros
|
Originally Posted by HDP
(Post 8919587)
Are these your standard tuning categories and fees because I'm not sure which one my car would fall under? Are you incorporating any flexibility within your tunes? For some reason I thought your tuning and fees would be on a per car basis. Also, why have you set a 12psi limit on stock twins.
Don, As discussed earlier I think 12psi is what most stock twin guys tune for. I am sure if you ask Ray to tune for 15psi or so he will but race gas is strongly suggested above that as the twins do produce more heat than a single set up. What is your goal on pump? I know 400 on race gas..... |
Originally Posted by sk8world
(Post 8919940)
What is your goal on pump? I know 400 on race gas.....
|
Originally Posted by HDP
(Post 8920226)
I was thinking maybe 15psi or as high as Ray feels comfortable on pump gas.
|
Originally Posted by forcefed7
(Post 8921026)
The 12psi is a standard level for me on stock twins, if you would like to run higher boost you can as the mapping will be calculated to max out the stock MAP sensor. Just keep in mind that charge efficiency dramatically declines over 320rwhp with the stock twins.
BTW I may try to come hang out as long as nothing comes up. Hopefully my car will be back together and that would be a good 200mi or so toward the break in for it. |
Originally Posted by SPICcnmGT
(Post 8921305)
I'm confused what you are saying. The stock MAP sensor is good up to around 17psi. And sorry to get off topic.
BTW I may try to come hang out as long as nothing comes up. Hopefully my car will be back together and that would be a good 200mi or so toward the break in for it. I believe what Ray is saying is even if he just tuned for 12psi he would continue a scale all the way thru the full n20-p20. So if one did spike on a cold night he would be ok. BTW Don is running a 3 bar so thats not an issue.. |
Originally Posted by forcefed7
(Post 8921026)
The 12psi is a standard level for me on stock twins, if you would like to run higher boost you can as the mapping will be calculated to max out the stock MAP sensor. Just keep in mind that charge efficiency dramatically declines over 320rwhp with the stock twins.
|
Originally Posted by sk8world
(Post 8921471)
I believe what Ray is saying is even if he just tuned for 12psi he would continue a scale all the way thru the full n20-p20. So if one did spike on a cold night he would be ok.
BTW Don is running a 3 bar so thats not an issue.. |
Full Payment sent 350.00
|
twins
Its about compressor effeciency. Most modern turbos operate in the +70% range. The stock twins turn into heat pumps after 12psi. Even with 99-spec twins they are in-effecient at higher boost levels. Even at 70% the heat is dramatic at 17psi since there is more heat created exponentially as boost levels go up. Most singles find there sweet spot and that is great. Hot air will pop a rotary faster than a speeding bullet.
88 Turbo II Rebuilt Street port REW with 5k on it and oem seals 850 primary, 850 secondary Aeromotive FPR Power FC FC coils FD Ignitor Walbro 255 Racing beat wires 9' in leading and trailing MBC S5 TO4B hybrid (stage 2 or 3 BNR) Racing beat Turbo Back Greddy FMIC Greddy Type S BOV OEM FD MAP 17psi Looking for highest horse Pump gas tune available 93 octane Dustin Wont be able to put my baby together for this and it makes me very sad........... Oh well at least this one will be tuned. |
Ray, I will get that deposit to you this week.
Thanks, Dustin |
Dustin is this one up an running yet? Better get on the ball!
|
sk8world or Ray are we going to be able to tune on the 27th?
Thanks, Steve |
I dont have rays flight info yet and I am also waiting to here from the dyno shop about the times open.
|
I'm not ready for a tune yet, but could I just dyno for a baseline?
|
Originally Posted by staticpat
(Post 8931911)
I'm not ready for a tune yet, but could I just dyno for a baseline?
|
Why? because he gets to hang out with some other rotor heads!
|
Running!!!!
|
hey i may have to get in on this
here the set up 87 s4 t2 goal is 450 rwhp but whatever till clutch slips or run out of fuel... reduild /large streetport all emissions gone premix haltech e6x 720/1600cc gt35r t4 .82 walboro 255 aem fpr full 3" exh. greddy pro fec b aem wb02 3 bar map guess i could have just said list in the sig.....dummy |
also my tune will be more of a full get the car running right as the base map is very rough. but i can drive it around sometime just fine but then others its wack like tryting to lean out like crazy but the weather has been changing alot here so maybe its just the temperture part of the maps
|
well i recieved a pm from sk8world but now no one says anything about this anymore?? i havent herd a word about if the on spot is open stil or not??? info would be nice since im in nashvlle.
thaks |
hey, i'd like to get in on this as well. i actually live down the street from Static X. i dont have a running 7, i just got my shell last month and getting my parts car tomorrow. i'll probably just hang out and watch. im only 18 and more than likely goin to rebuild my parts engine to put in my shell. i'll be more than glad to give local directions and info and such. just name the dyno place and i'll be there.
|
Mike, is it going to be at Art's dyno? Last I heard he was having problems with the torque showing and wideband issues. I think he was supposed to have it fixed but I haven't heard if its done or not.
Dustin |
ok.. I will post up more tonight as ray has booked the flight.
Dyno will be trackmasters. Will be $100 per hour. Everyone must pay the dyno fee after you get off. They take cash, visa, MC, discover.. Tuning will start around 10-11am Friday and run until 6pm. Then Saturday 8-9am until 1pm. Ray's flight leaves at 3pm. So we have to leave the dyno no later than 1pm. For anyone not paid or still interested please send the deposits asap. I will post the order and times for everyone asap. More later.. I am in a meeting. |
^ Nice glad to hear!
I would like to get in on friday if its possible. I can leave Biloxi in the morning and arrive at the dyno around 1pm in Hunstsville. Steve |
cool. I can be there.
Dustin |
Steven, Friday should be fine although it may be a tad later in the day. I will post up everyones time slot soon.
Dustin, Have you sent ray a deposit? Boost-its-whats ... (name please) are you in on this? Please send in deposit if so. I need the deposits in so I can schedule the time slots. If you do not you may or may not get tuned... violent gravy, you are more than welcome to come hang out/// |
wes carlock
posted info up top sending dep. now to ray right? |
also does any one have a base map i could try out thats near my set up? i have a few downloaded to mix match the stuff with but its so fucking cold here that i dont wanna try to start my car, plus i work all damn day til 1130pm so night are screwed for me to do anything with it.
ireally just need a map for a big streetport and 720-1600 i can get the other crap adjusted |
dep. sent
|
Originally Posted by sk8world
(Post 8940425)
Steven, Friday should be fine although it may be a tad later in the day. I will post up everyones time slot soon.
/// ^^Thats cool! Even better cause I won't have to rush to get up there before 1pm. Steve |
wes. you are running the haltech, right?
|
yes e6x estevan is sending his map since we have close to identical set ups
|
Sent it to your e-mail boost_its_what_for_dinner
let me know how it works for you. G/L Steve |
This is shaping up to be a fun weekend. So here is who I have on the list now:
1. sk8world 2. HDP 3. Steven 4. Doc-1 5. BoostedFDs3 6. Dustinali 7. Wes. mapquest oflocation. http://www.mapquest.com/maps?city=Hu...::r::25:::::/e |
damn only 2 hrs for me thought it be more than that
|
nah.. I drive to Franklin every week and its only 1.15 from my driveway to coolsprings area..
|
All times are GMT -5. The time now is 01:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands