expensive :)

around $30 a piece. he is gonna stock 10, 10.5, 11, and 11.5 heat ranges in NGK.

come on guys, i know their are more of you that need your cars tuned. and here's another update.

1.dregg100-FC, E6k, TO4S, large streetport, jacobs box, MSD coils, AI, etc (deposit recieved)
2.chagar-FD, Ceramic coated DP, RB catback, Fluidyne Rad, FC and commander, 1900 secondaries, CAI, Stage 1 rebuild, upgraded fuel pump, Greddy SMIC (deposit recieved)
3.2SLO2GO-FC, Stock port, 3" exhaust, Haltech E6X w/ elec filter, LS1 coils, walbro pump, Hybrid t-60, 1000cc Secs, FMIC. (deposit recieved)
4.BoostedFd3s-FD, Power FC, 500r, large streetport, hks twin power, supporting mods....
5. Noxlupus-FD, PFC, DP, MP, GReddy Ti CB, Fluidyne Rad. Hope to have by this time... 850cc PI, 1200cc SI, Custom IT and hopefully IC. (deposit recieved)
6.Derek10AE-FC, stock ports, E6X, GT35r, FMIC, 1600cc secondaries, supporting mods... (deposit recieved)
7. Bowtie7-FD, Single, PFC (deposit recieved)
8. adax-FD, GT 35/40, Big IC, 550/1300's, Supra pump, Power FC, HKS Twin Power, NGK 9's all around, midpipe, catback (deposit recieved)

Just an update:

5. Noxlupus-FD, PFC, DP, MP, GReddy Ti CB, Fluidyne Rad. Hope to have by this time... 850cc PI, 1200cc SI, GReddy FMIC, Rewired Stock fuel pump, hopefully Custom IT. (deposit received)

On a slightly different topic: What oil temp are you seeing on your FD after a few hard pulls at 80 degrees ambient temp (like today)? I'm thinking I might have an oil cooling problem with just one oil cooler... and I'm not sure if just one larger oil cooler with twice the capacity will do the trick any more... if tha being the case that puts a complete stop on my intake idea....

well what are you seeing?

hell dont worry about it just yet get the car tuned and then get you a set of dual oil coolers they run about 1100 brand new it all depends on where you look at plus if you make a duck for the oil cooler with good vent in the back it should help keep the temps down a little bit.

who edited the title?

I'm seeing a jump from 180°F to 240°F after one run, that is; WOT through 1, 2, and 3rd.

Well that goes without saying, but the Intake that i had planed on making utilizes the right hand oil cooler duct. With the oil temp problem I'm having I'll have to use that duct for another oil cooler instead of using it for a cold air intake.

you could put one large one in the middle like FCs have. that thing is a beast

So put it in front of the IC? LOL

no, behind the front mount. it works like a charm.

Hmm, I'll give that more thought later on. But first I need to get this IC installed and get an Intake (probably buy some used Apexi or HKS).

did you buy one of those intercoolers i sent you a link for?

here is how the schedule looks right now. if you have any objections please PM me instead of cluttering the thread.

in order starting from 8 am sat. june 9:

1. me
2. 2slo2go
3. derek10ae
4.chagar

then sunday:

1. bowtie7
2. noxlupus
3. adax
4. BoostedFd3s

sunday may change if we get anymore people. i have one other person who is interested, but not entirely sure if he will have the money, so we will see. on both days, once the cars are done being tuned is when people who just want to get 3 pulls can get on and do their thing.

I ended up buying one that was closer, in NC actually. So I have it already and will start installing it either tonight or tomorrow. Anyone is more then welcome to come help me... :D

put it up to the top!!!

bump?

Not to late to add another is it?

nope

no, whoever wants in just pm me.

-masin

Can you post an address for this place? Not having much Google luck.

Thanks

oops, kinda forgot that little detail here you go:

top dead center auto perf.
662 west main street
spartanburg, sc 29301

thats a big oops there :)

i think we are going to have this catered with bbq, so dont worry about bringing food. that is, for saturday at least. i should have some pricing for you guys on that tomorrow or wed.

just an update, we have one more person in and one person out (the guy that never sent in a deposit) im closing out any more people being added as of now. if you still want in you can come sunday and see if there is still time, but i would not count on it.

1.dregg100-FC, E6k, TO4S, large streetport, jacobs box, MSD coils, AI, etc (deposit recieved)
2.chagar-FD, Ceramic coated DP, RB catback, Fluidyne Rad, FC and commander, 1900 secondaries, CAI, Stage 1 rebuild, upgraded fuel pump, Greddy SMIC (deposit recieved)
3.2SLO2GO-FC, Stock port, 3" exhaust, Haltech E6X w/ elec filter, LS1 coils, walbro pump, Hybrid t-60, 1000cc Secs, FMIC. (deposit recieved)
4. R-1-FD, PFC, stock twins, street ported motor, HKS Downpipe, Greddy FMIC, intake, fuel pump. (deposit recieved)
5. Noxlupus-FD, PFC, DP, MP, GReddy Ti CB, Fluidyne Rad. Hope to have by this time... 850cc PI, 1200cc SI, Custom IT and hopefully IC. (deposit recieved)
6.Derek10AE-FC, stock ports, E6X, GT35r, FMIC, 1600cc secondaries, supporting mods... (deposit recieved)
7. Bowtie7-FD, Single, PFC (deposit recieved)
8. adax-FD, GT 35/40, Big IC, 550/1300's, Supra pump, Power FC, HKS Twin Power, NGK 9's all around, midpipe, catback (deposit recieved)

in order starting from 8 am sat. june 9:

1. me
2. 2slo2go
3. derek10ae
4. R-1

then sunday:

1. bowtie7
2. noxlupus
3. chagar
4.adax


and if anyone gets lost the day of or has any questions please feel free to give me a call. im going to send all on the list my cell number.