![]() |
then i would say he cant tune them because they dont have serial ports. i might be halucinating though.
|
Bumpers cars?
|
Masin what is going on? Got a new list and the SC meet is here also? if so awesome!!!!!!!!!!1
|
Can I still get a space on the 10th? Does the deposit go to Steve?
|
there still is a few spots left the deposit needs to be sent to a the paypal account mentioned couple pages back. dregg100 can give you more info as to how many spots are still left and all the other necesarry information.
|
pm sent!
|
yo masin how many spots do we still have left as off this point that way if there someone else they can jump on it before the list is full.
|
*cough* bump for you folks who wana join... sign up and let's get this rolling!
...and come on more FDs!!!! Just an update - Doesn't look good on the Custom IT or IC setup yet... IT is taking a bit more time to develop then planed. |
there is no set amount of "slots"
|
deposit sent to steve today, we are locked in!! for those that still want in there still time, but you must send me a deposit to lock in a spot. thanks
|
I'm in
'93 - relevant mods: GT 35/40, Big IC, 550/1300's, Supra pump, Power FC, HKS Twin Power, NGK 9's all around, midpipe, catback. I can't be there until around 1:00 Sunday. |
Giany you need to go and buy a Intake and an Intercooler and stop doing all the custom bullshit that is time consuming you cant get it tuned again with nothing more than just more fuel you will run out of air throu that stock air bix the the stock intercooler will blow ta fuck up under 14 psi so here you have it :) and get rid of your air pump get some underdrive pulies and you will be good to go with that.
|
1.dregg100 FC, E6k, TO4S, large streetport, jacobs box, MSD coils, meth injection, etc (deposit recieved)
2.chagar FD, Ceramic coated DP, RB catback, Fluidyne Rad, FC and commander, 1900 secondaries, CAI, Stage 1 rebuild, upgraded fuel pump, Greddy SMIC (deposit recieved) 3.2SLO2GO FC, Stock port, 3" exhaust, Haltech E6X w/ elec filter, LS1 coils, walbro pump, Hybrid t-60, 1000cc Secs, FMIC. (deposit recieved) 4.BoostedFd3s FD, Power FC, 500r, large streetport, hks twin power, supporting mods.... 5. Noxlupus FD: PFC, DP, MP, GReddy Ti CB, Fluidyne Rad. Hope to have by this time... 850cc PI, 1200cc SI, Custom IT and hopefully IC. (deposit recieved) 6.Derek10AE FC, stock ports, E6X, GT35r, FMIC, 1600cc secondaries, supporting mods... (deposit recieved) 7. Bowtie7-FD, Single, PFC 8. adax-FD, GT 35/40, Big IC, 550/1300's, Supra pump, Power FC, HKS Twin Power, NGK 9's all around, midpipe, catback here is the updated list. there is still time for others to get their names on the list. just pm me. thanks! |
I asume everyting is a go. Where will the meet be? From the list I only count four and I thought we needed a max of five.
Excuse if I missed something |
just recount then because there are five listed as "deposit recieved"
the dyno is gonna be at Top Dead Center in spartanburg (i know you know him charles) he said he would do a flat rate of $75 per car no matter if you are tuning or just want 3 pulls. he also said if we want we can have some food brought in if their will be enough people. and besides spark plugs fouling, what else can you guys think of that commonly breaks on a rotary on the dyno? he told me to get part numbers for common things that break and he will stock them. real stand up guy. the dyno is a brand new dynojet. and i mean BRAND SPANKING NEW!!!! |
Originally Posted by rotarycrazy
(Post 6928357)
Giany you need to go and buy a Intake and an Intercooler and stop doing all the custom bullshit that is time consuming you cant get it tuned again with nothing more than just more fuel you will run out of air throu that stock air bix the the stock intercooler will blow ta fuck up under 14 psi so here you have it :) and get rid of your air pump get some underdrive pulies and you will be good to go with that.
I do want to get ride of the the air pump but that'll just have to wait. It's functioning well enough as a dead pulley so it'll have to stick around for a bit. So it comes down to this, if by then all I have is the new injectors, then so be it... Car can be tuned for drive-ability, etc. Especially since my injectors are currently running at 100%... So just that alone and having it properly tuned would be worth the the tune. |
hey I would lend you my intake but I cant drive my car without it so that a nogo. Go on the god forsaken E-bay and get one there.
|
Go to ebay says the man who told me NEVER to get anything from Ebay...
|
hahaha^^^^
|
Originally Posted by dregg100
(Post 6929928)
the dyno is gonna be at Top Dead Center in spartanburg (i know you know him charles) he said he would do a flat rate of $75 per car no matter if you are tuning or just want 3 pulls. he also said if we want we can have some food brought in if their will be enough people.
and besides spark plugs fouling, what else can you guys think of that commonly breaks on a rotary on the dyno? he told me to get part numbers for common things that break and he will stock them. real stand up guy. the dyno is a brand new dynojet. and i mean BRAND SPANKING NEW!!!! |
no its on 6/9-10 the second weekend in June.
|
o, ok, thanx. should've remembered that.
|
1.dregg100 FC, E6k, TO4S, large streetport, jacobs box, MSD coils, meth injection, etc (deposit recieved)
2.chagar FD, Ceramic coated DP, RB catback, Fluidyne Rad, FC and commander, 1900 secondaries, CAI, Stage 1 rebuild, upgraded fuel pump, Greddy SMIC (deposit recieved) 3.2SLO2GO FC, Stock port, 3" exhaust, Haltech E6X w/ elec filter, LS1 coils, walbro pump, Hybrid t-60, 1000cc Secs, FMIC. (deposit recieved) 4.BoostedFd3s FD, Power FC, 500r, large streetport, hks twin power, supporting mods.... 5. Noxlupus FD: PFC, DP, MP, GReddy Ti CB, Fluidyne Rad. Hope to have by this time... 850cc PI, 1200cc SI, Custom IT and hopefully IC. (deposit recieved) 6.Derek10AE FC, stock ports, E6X, GT35r, FMIC, 1600cc secondaries, supporting mods... (deposit recieved) 7. Bowtie7-FD, Single, PFC 8. adax-FD, GT 35/40, Big IC, 550/1300's, Supra pump, Power FC, HKS Twin Power, NGK 9's all around, midpipe, catback (deposit recieved) update |
i was over at the dyno this weekend, and he said he is gonna have a few barrels of C16 on hand if anybody wants to use it. also, if you guys are gonna need race plugs, he is gonna stock NGK 10,10.5, and 11s heat ranges for us.
|
How much for the plugs?
|
All times are GMT -5. The time now is 10:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands