Steve Kan tuning - for real this time
04-03-16, 11:31 PM
#1
Steve Kan tuning - for real this time
Ok. The last thread didn't really go anywhere and I think things got confusing for some people. For those who are definitely interested, please post in this thread in the following list format, with your computer type:
1. Brilliant7-LFC (Microtech LT-9c)
2.
3.
4.
5.
6.
7.
Steve's time is money of course, so there needs to be more than just a few who are interested.
I know we had a handful of guys before.
If you are ANYWHERE in Florida and want a top-notch, quality and SAFE tune, please post here. I'm happy to travel if necessary to make this happen. So, this invite goes out to all of Florida.
The cost of a rebuild is too great. Don't keep at it without a proper tune! If you don't have 100% confidence in your tune, than you should get in on this.
If anyone has any questions, I can do my best to get answers direct from Steve.
Thank you all for your time. Hope we can finally get something done.
Nick
1. Brilliant7-LFC (Microtech LT-9c)
2.
3.
4.
5.
6.
7.
Steve's time is money of course, so there needs to be more than just a few who are interested.
I know we had a handful of guys before.
If you are ANYWHERE in Florida and want a top-notch, quality and SAFE tune, please post here. I'm happy to travel if necessary to make this happen. So, this invite goes out to all of Florida.
The cost of a rebuild is too great. Don't keep at it without a proper tune! If you don't have 100% confidence in your tune, than you should get in on this.
If anyone has any questions, I can do my best to get answers direct from Steve.
Thank you all for your time. Hope we can finally get something done.
Nick
04-07-16, 02:03 AM
#2
i want to get in on this. i hear there may be one in atlanta in april tho. and it seemed the price was way high last time with dyno time and flight **** added in. Seems cheaper for me to drive 8 hours into texas thasn 8 hours to orlando (people underestimate the length of the pan handle). keep me up to date tho as im in serious need for a tune. about to stat working with elliot from turblown to do a E-tune for now
1. Brilliant7-LFC (Microtech LT-9c)
2. Austin102085 (adaptronic x2 maps)
3.
4.
5.
6.
7.
1. Brilliant7-LFC (Microtech LT-9c)
2. Austin102085 (adaptronic x2 maps)
3.
4.
5.
6.
7.
Last edited by austin102085; 04-07-16 at 02:07 AM.
04-07-16, 02:36 PM
#3
Austin, get the word out to anyone in your area too. I'm going to reach out to people I know back home in Miami to see if they'd be interested as well. Maybe they'd be open to driving a few hours to get it done.
If you guys have any ideas please feel free to get in touch with me. Unfortunately, these cars are rare so we have to get a little creative to find enough bodies.
Nick
If you guys have any ideas please feel free to get in touch with me. Unfortunately, these cars are rare so we have to get a little creative to find enough bodies.
Nick
04-13-16, 02:20 PM
#7
Truthfully, this isn't really as much about making your car faster but more for guys like me and several others who aren't happy with their tune in one way or another.
If you're fully satisfied and you don't have any issues, I personally wouldn't touch it.
For me, my tune is all jacked up. I NEED it. I'm trying my best to get this off the ground, but for whatever reason, even people who were "100%" on board before aren't too interested now.
I may opt for the E-Tune and have Steve do it over wifi.
Nick
If you're fully satisfied and you don't have any issues, I personally wouldn't touch it.
For me, my tune is all jacked up. I NEED it. I'm trying my best to get this off the ground, but for whatever reason, even people who were "100%" on board before aren't too interested now.
I may opt for the E-Tune and have Steve do it over wifi.
Nick
Thread
Thread Starter
Forum
Replies
Last Post
