i hope this is my last question, but will there be a wideband available incase mine acts up and wont work?

 

Dynolab has a wideband and other datalogging equipment. Easter weekend is confirmed.

 

Oh hell. Eh, Ill PM FDNewbie about the DC date. Maybe Ill hit that one instead

 

1. Collier-FD streetport, single, PFC, 550/1300, Greddy FMIC, Profec B, fuel pump
2. Underwood- FD, streetport, 550/1300, Apexi RX6 single, PFC, fuel pump, Twin Power
3. Clifford- FD, stock twins, downpipe, catback, PFC, fuel pump
4. Lethal- FD, Big single and who knows what else
5. Dregg100- FC, Garrett TO4S, megasquirt, 720/1680s, aggresive street port, etc
6. Noxlupus - FD, Stock Twins, DP, MP, CB, PFC, etc.
7. Cooper- FD, big single, 550/1600, PFC, Jacobs, stock block

 

. Collier-FD streetport, single, PFC, 550/1300, Greddy FMIC, Profec B, fuel pump
2. Underwood- FD, streetport, 550/1300, Apexi RX6 single, PFC, fuel pump, Twin Power
3. Clifford- FD, stock twins, downpipe, catback, PFC, fuel pump
4. Lethal- FD, Big single and who knows what else
5. Dregg100- FC, Garrett TO4S, megasquirt, 720/1680s, aggresive street port, etc
6. Noxlupus - FD, Stock Twins, DP, MP, CB, PFC, etc.
7. Cooper- FD, big single, 550/1600, PFC, Jacobs, stock block
8. Grise- FD, stock twins, 550/1300, PFC
9. Mooney-FD

 

so is it gonna be on sat and sunday or just sunday?

 

Charlie,

Thanks for putting this together for the Atlanta area. I might have to come to just hang out and watch. I haven't seen you or Doug in awhile so that would be worth it right there.

Tim

 

Bumps for good measure and to give others a chance to sign up.

 

What about pricing for a WOLF3d run bridgeport? (N/A)

 

which version wolf 3D are you running? Are you currently configure to run TPS vs. rpm instead of map vs. rpm since this is the only way to make it work in N/A application.

 

Wish I knew which version, how can i check?

 

it should tell you on the hand held and/or the laptop software.

 

Niether of which came with the car......

 

This is all I know about..lol

 

Looks like the wolf 3D v.3. I don't know if i wanted to touch them. Every V3 units I messed with has the 6k rpm pick up interference. I spent way more time debugging it than actually tuning it.

 

with race plugs, do we need to buy then for just the leading, or all the way around? those bitches are expensive!

 

just the leading should be fine but make sure to put 9's for the trailing

 

. Collier-FD streetport, single, PFC, 550/1300, Greddy FMIC, Profec B, fuel pump
2. Underwood- FD, streetport, 550/1300, Apexi RX6 single, PFC, fuel pump, Twin Power
3. Clifford- FD, stock twins, downpipe, catback, PFC, fuel pump
4. Lethal- FD, Big single and who knows what else
5. Dregg100- FC, Garrett TO4S, megasquirt, 720/1680s, aggresive street port, etc
6. Noxlupus - FD, Stock Twins, DP, MP, CB, PFC, etc.
7. Cooper- FD, big single, 550/1600, PFC, Jacobs, stock block
8. Grise- FD, stock twins, 550/1300, PFC
9. Mooney-FD
10. Roberts- FD, stock block, PFC

 

Yeah V3... Hmm... I noticed that after 6k the Tach cuts out... wierd.

 

Charlie -- put me down for sure. I'll give you a call about the deposit (and some other work I'd like to get done B4 the tuning session)...

Mods in sig -- this is for the FD.

Thanks,
Troy

 

Collier-FD streetport, single, PFC, 550/1300, Greddy FMIC, Profec B, fuel pump
2. Underwood- FD, streetport, 550/1300, Apexi RX6 single, PFC, fuel pump, Twin Power
3. Clifford- FD, stock twins, downpipe, catback, PFC, fuel pump
4. Lethal- FD, Big single and who knows what else
5. Dregg100- FC, Garrett TO4S, megasquirt, 720/1680s, aggresive street port, etc
6. Noxlupus - FD, Stock Twins, DP, MP, CB, PFC, etc.
7. Cooper- FD, big single, 550/1600, PFC, Jacobs, stock block
8. Grise- FD, stock twins, 550/1300, PFC
9. Mooney-FD
10. Roberts- FD, stock block, PFC
11. Hoosier Daddy-FD

 

I am cutting this off at this time so that all can get tuned in the alloted time. If you have not contacted me about your deposit please do as it will reserve your time slot.

 

Sorry to jump in at this late date, but I'm David Hayes, the guy with the extremely long thread about my 20B conversion:

https://www.rx7club.com/build-threads-292/kilo-racing-3-rotor-fd-conversion-325733/

In short, Steve Kan had to go out of country this week and I didn't pick up my car in Dallas as planned. The new plan is for Steve to drive the car to the Atlanta tuning event where I'll officially pick up the car.

Sorry to jump in at this late date, but I discussed with Steve getting the car dynoed at your shop. Shouldn't require tuning but I thought it would fun to have a final dyno of the project and the car. My question is, can I fit into the schedule for this? I appreciate the consideration

 

if you come, please come on sunday!!!! here is the shops number: 770-859-9643. just give then a call or send him a PM hes not on the board much.

 

I'll definately be there because I'm picking up my car at the event. Not on Sunday though - have to hit the road for back home.