Rollbar and interior prep in Central FL
#1
Rollbar and interior prep in Central FL
Hi all ~
I've been waiting for the day I could post this and it's finally here. I'm looking for any help to find someone in the Central Florida region that can put together a roll bar and help me out with some prep work on my 1984 Rx-7. It doesn't have to be the same person/shop either. First let me outline what I want.
I'm not looking for a cage really, unless I can get one that's not too obtrusive for a car that will be driven mainly on the streets. I want something that will basically stiffen the unibody and allow me to run a mostly stock upholstered interior - headliner, dashboard, all panels and my carpeting. I plan to ditch the factory storage bins because rust ate the paneling that the bins sat in and I figured it's too much of a pain in the *** to get replacements. (So I'll also need someone that can make some custom cut carpeting in the event that I can't do it) Besides, I plan to mount my EMS and battery in the new space and fab up some paneling big enough to mount them and cover them from prying eyes.
I would prefer to have as much of it welded to the car as possible, but I know there will be parts that have to be bolted. My car is actually pretty good as far as rust is concerned, but it will require some work.
I also want to have someone that can prep the interior for me. I should be getting my POR-15 soon, but body prep had never been my strongsuit, so I'll probably want someone with experience to do it for me or with me. Usually I try to do everything for myself, but I know my limits.
Right now the car is stripped and not running, but hopefully it should be running in the next 6 weeks or so.
I hope this wasn't too vague. I'm essentially looking for someone in the Orlando, Tampa, Ocala region, but when the car is running, I have no problems going to Miami or Jacksonville.
So have at it. Any info or links will be appreciated.
1
I've been waiting for the day I could post this and it's finally here. I'm looking for any help to find someone in the Central Florida region that can put together a roll bar and help me out with some prep work on my 1984 Rx-7. It doesn't have to be the same person/shop either. First let me outline what I want.
I'm not looking for a cage really, unless I can get one that's not too obtrusive for a car that will be driven mainly on the streets. I want something that will basically stiffen the unibody and allow me to run a mostly stock upholstered interior - headliner, dashboard, all panels and my carpeting. I plan to ditch the factory storage bins because rust ate the paneling that the bins sat in and I figured it's too much of a pain in the *** to get replacements. (So I'll also need someone that can make some custom cut carpeting in the event that I can't do it) Besides, I plan to mount my EMS and battery in the new space and fab up some paneling big enough to mount them and cover them from prying eyes.
I would prefer to have as much of it welded to the car as possible, but I know there will be parts that have to be bolted. My car is actually pretty good as far as rust is concerned, but it will require some work.
I also want to have someone that can prep the interior for me. I should be getting my POR-15 soon, but body prep had never been my strongsuit, so I'll probably want someone with experience to do it for me or with me. Usually I try to do everything for myself, but I know my limits.
Right now the car is stripped and not running, but hopefully it should be running in the next 6 weeks or so.
I hope this wasn't too vague. I'm essentially looking for someone in the Orlando, Tampa, Ocala region, but when the car is running, I have no problems going to Miami or Jacksonville.
So have at it. Any info or links will be appreciated.
1
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM