Official Florida Postwhoring Thread--------
any of you florida guys interested in parts if i part out my car? or should i sell it as a whole?
Trying to weigh my options :I
88 TII, street ported. ~30-40k.
T04B(p trim or h trim or something)(.6x?a/r, .96 hotside) Banks turbo. I don't know much about it, came on the car when I bought it. I had planned to upgrade the turbo this winter.
720 Primaries
1680 Secondary
Walbro 255
Marren FPD
Aeromotive FPR w/ gauge
AN-6 Fuel lines
Tial 44mm WG
Tial 50mm BOV
Racing Beat exhaust, manifold to mufflers. 3 in downpipe etc.
Haltech E6X
Haltech Boost Control Solenoid
Haltech Shift Light
Haltech Trim Control Box
PLX M300
Pineapple Racing Dual EGT Kit
Mazdatrix Short Shifter
S5 Taillights
17" Wheels
Eibach Springs
KYB Struts
XTD 6 puck sprung hub
XTD HD pressure plate
New Upper and Lower Rad hoses and New Mazda T-Stat
Yoohoo Belt
Custom redone Haltech Harness (very neat,loomed heat shrinked)
Ported s5 TB with secondary butterflies removed.
A/C, emissions,OMP, air pump,heater core, blower motor, etc. removed. Everything but the power steering is gone.
ABS Removed, Custom re bent brake lines to the passenger side front.
New Brake Master Cylinder/Reservoir
The Bad?
Car needs paint, its black, but the hood and rear fenders are flat/gloss black.
Gutted interior, nothing inside the center console, I planned to put a radio in it, never did.
Stuff I have but have not installed yet:
FMIC 24x12x3 (3" in/out)
3" Universal piping kit various bends, 90's, straights. Shiney Aluminum, Flared ends
Greddy/Trust TB Compression Tube
Custom Turbohoses turbo and TB hoses
Mocal Oil Cooler
Spare Walbro 255
Car made ~327hp @ 12 psi with the stock Top Mount IC
That should be most of it I think.
Let me know what you guys think
thanks
Trying to weigh my options :I
88 TII, street ported. ~30-40k.
T04B(p trim or h trim or something)(.6x?a/r, .96 hotside) Banks turbo. I don't know much about it, came on the car when I bought it. I had planned to upgrade the turbo this winter.
720 Primaries
1680 Secondary
Walbro 255
Marren FPD
Aeromotive FPR w/ gauge
AN-6 Fuel lines
Tial 44mm WG
Tial 50mm BOV
Racing Beat exhaust, manifold to mufflers. 3 in downpipe etc.
Haltech E6X
Haltech Boost Control Solenoid
Haltech Shift Light
Haltech Trim Control Box
PLX M300
Pineapple Racing Dual EGT Kit
Mazdatrix Short Shifter
S5 Taillights
17" Wheels
Eibach Springs
KYB Struts
XTD 6 puck sprung hub
XTD HD pressure plate
New Upper and Lower Rad hoses and New Mazda T-Stat
Yoohoo Belt
Custom redone Haltech Harness (very neat,loomed heat shrinked)
Ported s5 TB with secondary butterflies removed.
A/C, emissions,OMP, air pump,heater core, blower motor, etc. removed. Everything but the power steering is gone.
ABS Removed, Custom re bent brake lines to the passenger side front.
New Brake Master Cylinder/Reservoir
The Bad?
Car needs paint, its black, but the hood and rear fenders are flat/gloss black.
Gutted interior, nothing inside the center console, I planned to put a radio in it, never did.
Stuff I have but have not installed yet:
FMIC 24x12x3 (3" in/out)
3" Universal piping kit various bends, 90's, straights. Shiney Aluminum, Flared ends
Greddy/Trust TB Compression Tube
Custom Turbohoses turbo and TB hoses
Mocal Oil Cooler
Spare Walbro 255
Car made ~327hp @ 12 psi with the stock Top Mount IC
That should be most of it I think.
Let me know what you guys think
thanks
ROBRXRAY
Joined: Aug 2004
Posts: 2,988
Likes: 0
From: florida
i got a baby's brain and an old man's heart
took 18 years to get this far
don't always know what i'm talkin about
seems like i'm livin in the middle of doubt because
I'M page 18, i don't know what I want
i gotta get out of this place
i go runnin in outer space
oh yeaaaaaaaaaaaahhhhhhh
took 18 years to get this far
don't always know what i'm talkin about
seems like i'm livin in the middle of doubt because
I'M page 18, i don't know what I want
i gotta get out of this place
i go runnin in outer space
oh yeaaaaaaaaaaaahhhhhhh
Joined: May 2004
Posts: 2,988
Likes: 0
From: Home of the 305 Boyz(miami)
/\ whats that.
BTW anybody have a videocamera i can borrow this saturday? were going to be dynoing the car and i want to tape the dyno and the runs that we use! and ill be putting on this stuff!
this saturday @ alex shop located near metro zoo (going for 600hp)
from left to right. MSD 6al ignition box, msd blaster coil #1, ignition wires, gm coil, Blaster coil #2, 850cc injectors with modified fuel rail for the rx7
[/QUOTE]
BTW anybody have a videocamera i can borrow this saturday? were going to be dynoing the car and i want to tape the dyno and the runs that we use! and ill be putting on this stuff!
this saturday @ alex shop located near metro zoo (going for 600hp)
from left to right. MSD 6al ignition box, msd blaster coil #1, ignition wires, gm coil, Blaster coil #2, 850cc injectors with modified fuel rail for the rx7
[/QUOTE]
very sleepy!!
Joined: Jan 2005
Posts: 1,052
Likes: 0
From: Tampa, FL
720 Primaries
1680 Secondary
Walbro 255
Aeromotive FPR w/ gauge
Haltech Boost Control Solenoid
Eibach Springs
KYB Struts
Custom redone Haltech Harness (very neat,loomed heat shrinked)
FMIC 24x12x3 (3" in/out)
3" Universal piping kit various bends, 90's, straights. Shiney Aluminum, Flared ends
Spare Walbro 255
1680 Secondary
Walbro 255
Aeromotive FPR w/ gauge
Haltech Boost Control Solenoid
Eibach Springs
KYB Struts
Custom redone Haltech Harness (very neat,loomed heat shrinked)
FMIC 24x12x3 (3" in/out)
3" Universal piping kit various bends, 90's, straights. Shiney Aluminum, Flared ends
Spare Walbro 255
i'm interested in these. can you pm me with prices?