I just put in a rebuilt engine from Kevin Landers (street port) and am having some terrible idleing and flooding issues I'm trying to work out. I wanted to see if any of you rotary gurus around the Fayetteville, Elizabethtown, Lumberton, or Wilmington area could cruise down one weekend and help me troubleshoot these issues before I load it up and take it to rotorsports. Free BEER(s)!!!

 

check injector o-rings and have the injectors flow tested most likely a leak in that area.

 

I had all four injectors cleaned and flow tested by witchhunter before putting the engine back in. They all tested out fine and have new pintle caps and o-rings. But I will double check this area.

 

I can help if needed

 

Im so sorry to hijack the thread, but im in the process of installing my engine into my new fd. Im in sandy springs and need help completing my install :/

 

Have you dialed in your TPS? That could be your cause for bad Idle, if you just bolt it on its not going to be correct and needs to be dialed in.