darkphantom

iTrader: (2)

If someone could help me install a single turbo in my car I would appreciate it. (ill even pay them) so if anybody could help me out with any of it they will be rewarded $$$$.

Derek10AE

Where are you located?

darkphantom

iTrader: (2)

Miami, Fl Right Near The Falls (IN WALKING DISTANCE)


ANY HELP WOULD BE APPRECIATED $ BUCKS TO WHOEVER HELPS OUT

NAVDREG

What happened to the mechanic that I recommended... who has a T78 in his 2nd Gen Vert... ? Why havent you gone over there ? Here is his number again.. his name is Dennis DeSilva... 786-293-9443.. he is located at 18773 SW 105th Place. The Mint Green warehouses.

darkphantom

iTrader: (2)

ILL GIVE HIM A CALL. btw YOU NEVER GAVE ME THE NUMBER IN THE FIRST PLACE. JUST TOLD ME WHO HE IS

oneflytrini

iTrader: (1)

Damn, I just looked at your profile, and noticed its putting down 264 at 5lbs

Mine put down 248 at 10lbs. Then again i only have a small polish, and a full 3' exhaust.

darkphantom

iTrader: (2)

alex did the dyno for me. but the turbo im putting in will close to double that power. I ask Phil already & he said it will be a while before he could help out. I mean its just a take the old parts out & put the new in.. its the wires & lines im scared about. thats y i need help. Alex said he could help me taking out the old twins

darkphantom

iTrader: (2)

i never imagine this to be huge! but it is

papsmagu

iTrader: (19)

yeah t-78 is pretty big........how many lbs. of boost do you plan on running?

FD Rey

yeah what he said ^. What fuel mods, ecu?

darkphantom

iTrader: (2)

All that is need to be done is an intercooler/ ignition/upgraded pulleys/boost controller. Everything else was already on the car. (including the fuel)

as for boost probably no more than 15psi

FD Rey

Intercooler is a must! Pulleys and ignition it's not all that necessary. You can make good amount of power on stock coils. What computer are you running? Power FC, Microtech, Haltech? Did you get the entire Greddy kit? With manifold, wastegate, and downpipe? What spring is the wastegate?

How much power do you want to make? Cause a T78 isn't very efficient until you crank up the boost. You'd probably make just as much power at 15psi, as some people out there make with 60-1s 62-1s. I'm shooting for 400 with my new slightly better turbo

papsmagu

iTrader: (19)

i think he has a PFC. i agree if you are only going to run 15 lbs. you should go with something smaller. I have a TD06 in my car, i love it, spools up really quick. as far as a wastegate, i suggest you use a HKS standard, if you haven't already bought one. if you go HKS i believe you have to use the yellow spring for your desired boost levels but you can check out their site to confirm

darkphantom

iTrader: (2)

the only reason why i was only boosting that low is because of the intercooler i have. Until i get a reasonable enough IC im not going to risk it. The T78 came with everything (was practically new) and for $2100 you cant go wrong with that. mods in my sig; the only thing that didnt come with it was the instructions, HENCE why i was asking for help to put this in the car. & BTW i frogot about the wideband that i need to get as well

My ecu is a power FC & dont know about the wastegate spring.

IMO the whole reason y i got the turbo is to get into the 10s or less in the Qmile

rey i thought you already had a single turbo in the car?