Detailed my friends FD.....
Thread Starter
Wangan Nasty
Joined: Apr 2006
Posts: 1,779
Likes: 3
From: Irvine, Southern California
Detailed my friends FD.....
I just detailed my friends FD last weekend. Car is stock except for a Fujitsubo Exhaust.
Car is a 1993 Type R.
Hope you like the pictures. Sorry, the sunlight did not exactly give me the time of day.
Driver's side footwell got dirty getting in and out a lot, decided to vaccum it later.













Hope you like my work.
Thanks.
Car is a 1993 Type R.
Hope you like the pictures. Sorry, the sunlight did not exactly give me the time of day.
Driver's side footwell got dirty getting in and out a lot, decided to vaccum it later.













Hope you like my work.
Thanks.
Thread Starter
Wangan Nasty
Joined: Apr 2006
Posts: 1,779
Likes: 3
From: Irvine, Southern California
For the paint. I did my initial cut with autoglym fine abrasive, then went on it with a softer pad with Meguiars No 80 Speed Glaze, and then i used a special Black Car finishing glaze. Finished it off with Autoglym Radiant Wax polish. I did all of this with a Porter Cable 7336SP Buffer.
Engine bay got a full wash down, waxed the jambs and conditioned all the plastics and moldings.
Engine bay got a full wash down, waxed the jambs and conditioned all the plastics and moldings.
Originally Posted by Miata_mx5
For the paint. I did my initial cut with autoglym fine abrasive, then went on it with a softer pad with Meguiars No 80 Speed Glaze, and then i used a special Black Car finishing glaze. Finished it off with Autoglym Radiant Wax polish. I did all of this with a Porter Cable 7336SP Buffer.
Engine bay got a full wash down, waxed the jambs and conditioned all the plastics and moldings.
Engine bay got a full wash down, waxed the jambs and conditioned all the plastics and moldings.
Thread Starter
Wangan Nasty
Joined: Apr 2006
Posts: 1,779
Likes: 3
From: Irvine, Southern California
I used autoglym Plastic conditioner for all the big pieces in the engine bay.(the stuff is like a gel), then all the plastics just got shot over with a plastic finishing spray (perfect 10). Leaves a non-greasy finish. The motor first had key areas sealed and was pressure washed.
Tires got rubber conditioner (its a liquid), also an autoglym product. Degreased and Cleaned the wheels. Also, i made sure to condition and clean the Wheel-wells. That also makes a big difference.
Tires got rubber conditioner (its a liquid), also an autoglym product. Degreased and Cleaned the wheels. Also, i made sure to condition and clean the Wheel-wells. That also makes a big difference.
you should post this on www.autopia.org
Trending Topics
Thread Starter
Wangan Nasty
Joined: Apr 2006
Posts: 1,779
Likes: 3
From: Irvine, Southern California
Ya, the car is getting some wheels put on soon, when it does, i will take some direct sunlight pictures, and post it here and there. I need to remake my account on autopia.
Thread Starter
Wangan Nasty
Joined: Apr 2006
Posts: 1,779
Likes: 3
From: Irvine, Southern California
Yes, the paint is original. It was not that hard to find a clean/stock 93 FD for my friend. He has another black RHD FD, thats a 94 R package FD also that he brought in. I will be working on that one soon, but this one is a lot cleaner. Has 40,000 miles in kilometers, clean interior. He would sell it to me, i would love to buy it as a track beast or register it out of state. But sadly, i dont have the money to do this right.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
Sep 1, 2015 10:46 PM






