Rtek Rtek 2.0 and t04s
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: Rivière du Loup
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Rtek 2.0 and t04s
I would like to know if the RTEK 2.0 would be able to tolirate my modification?
MY set up:Turbo hybrid to4s
external wastegate
fmic
3" straight pipe exhaust
bov
4x 720cc injector
cold air intake
walbro fuel pump
Centerforce dual friction clutch
I would like to boost up 12psi,Is it possible?
MY set up:Turbo hybrid to4s
external wastegate
fmic
3" straight pipe exhaust
bov
4x 720cc injector
cold air intake
walbro fuel pump
Centerforce dual friction clutch
I would like to boost up 12psi,Is it possible?
#3
Senior Member
Join Date: Mar 2001
Location: Vancouver
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
Should be fine. You should at least tune with as wideband to ensure that your not
leaning out. Keep an eye on the AFM sensor and max duty cycles (on the log screen)
during tuning to make sure you not maxing either. You'll probably want to pull a bit of
timing as well.
-Henrik
leaning out. Keep an eye on the AFM sensor and max duty cycles (on the log screen)
during tuning to make sure you not maxing either. You'll probably want to pull a bit of
timing as well.
-Henrik
Thread
Thread Starter
Forum
Replies
Last Post