Rtek Rtek 2.0 question on 87TII
#1
I'm back Bishes
Thread Starter
Join Date: Jan 2006
Location: Rhode Island
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
Rtek 2.0 question on 87TII
Will the Rtek 2.0 allow me to use an aftermarket turbo manifold and wastegate on my mild bridge tII? I am also planning on going T66 with it...I have all of the necessary fuel upgrades but I was told by brian at BNR that even his stage 4 upgrade was inadequate for my motor..
Thanks
Thanks
#3
I'm back Bishes
Thread Starter
Join Date: Jan 2006
Location: Rhode Island
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by turbo2ltr
I'm not sure what you are asking. You can use whateverr manifold you want, it has nothing to do with the ECU.
#4
Senior Member
Join Date: Mar 2001
Location: Vancouver
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
It can work, but its probably not the best choice for your situation.
Really, it comes down to how much boost and power your intending
to make, under 1bar and 300rwhp an Rtek will work very well. Above that
it can still work, but its ability to accurately control fuel/timing becomes
lessened.
-Henrik
Really, it comes down to how much boost and power your intending
to make, under 1bar and 300rwhp an Rtek will work very well. Above that
it can still work, but its ability to accurately control fuel/timing becomes
lessened.
-Henrik
#5
I'm back Bishes
Thread Starter
Join Date: Jan 2006
Location: Rhode Island
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Henrik
It can work, but its probably not the best choice for your situation.
Really, it comes down to how much boost and power your intending
to make, under 1bar and 300rwhp an Rtek will work very well. Above that
it can still work, but its ability to accurately control fuel/timing becomes
lessened.
-Henrik
Really, it comes down to how much boost and power your intending
to make, under 1bar and 300rwhp an Rtek will work very well. Above that
it can still work, but its ability to accurately control fuel/timing becomes
lessened.
-Henrik
#7
I'm back Bishes
Thread Starter
Join Date: Jan 2006
Location: Rhode Island
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by boostin_7
i think that haltech make a plug & play model now for FC's.
Trending Topics
#9
K2RD on the other hand has a plug in harness for haltech to rx-7. About the only product they still sell these days
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM