Who has the fastest N/A rotary dragrace car?
#151
Good lord this thread got rowdy! If I didn't know better, this would make for a perfect WWF grudge style match between two bad asses next season at the track
Remember fellas, this is a community of some of the most knowledgeable people in the rotary racing scene. Although I'm not in this group I have a great deal of respect for what all of you guys that have given back to the rotary community through your countless hours helping people out on this site whether directly or indirectly. No need for any drama, lets leave that up to the bitches
Remember fellas, this is a community of some of the most knowledgeable people in the rotary racing scene. Although I'm not in this group I have a great deal of respect for what all of you guys that have given back to the rotary community through your countless hours helping people out on this site whether directly or indirectly. No need for any drama, lets leave that up to the bitches
#154
GorillaRaceEngineering.co
iTrader: (1)
Contributors like your father? Yeah.....Way to f'k that on up kiddoh. "Hire a teenager while he knows everything".
"Groupie"? Yes thank you.....Of the rotary and it's accomplishments.
-J
#157
Rotary Freak
again good luck to you, your a young kid and is still not to late for you..
Last edited by Judge Ito; 12-11-08 at 04:16 AM.
#159
Answer: I am someone who has more respect towards people/racers than you.
Contributors like your father? Yeah.....Way to f'k that on up kiddoh. "Hire a teenager while he knows everything".
"Groupie"? Yes thank you.....Of the rotary and it's accomplishments.
-J
Contributors like your father? Yeah.....Way to f'k that on up kiddoh. "Hire a teenager while he knows everything".
"Groupie"? Yes thank you.....Of the rotary and it's accomplishments.
-J
#162
Till you can see a 9.5 run?? Just because you did not see it, doesn't mean it didn't happen. Joe Perez is the current N/A record holder and has been for 12 years. Kid your very disrespectful. You come here as a new member and go off on just about anybody. call me a non racer and a wife. that shows your level of maturity and respect towards me and everyone else. which is none!!!! Kid I been a member to this forum for 7 years, I been around import drag racing before you was born. I have personal accomplishments in drag racing that you have never heard of or probably seen. Does that mean it didn't happen? Out of respect for your father, (which is a friend of mine) I'll spare you a lashing. but rest assure, your headed in the wrong direction..
again good luck to you, your a young kid and is still not to late for you..
again good luck to you, your a young kid and is still not to late for you..
#164
InsaneRotaries.com
Kilito, didn't I have a long chat with you yesterday about this nonsence??
I told you not because someone may be wrong or mis informed about something, you need to make it your business and correct them.. Everyday I encounter people who may be saying something thats not 100% accurate, but I just leave them- let it be... Once you start correcting every post or every person, people look at you like a cocky, know it all, and they eventually start laughing at you...
If, in you opinion these guys are wrong, why are you going on and on about it?? Don't lose sleep over something that happen way back when you were still in diapers. The guys that are correcting you have been there and have seen with their own eyes, so why argue with that??
You father holds the record for the worlds fastest stock bodied AM rotary, what else do you want??? He's a legend in his own right and no one is trying to take his accomplishments away from him.
Do you think you will get any respect from the NE guys with the way you're acting? Imagine you come to Atco or Etown and you break something with no spare in the trailer, who will you call on for help?? Ito's shop is close to track, but do you think he will offer his assistance to you?? Maybe to your father, but not to you, only because of your attitude..
Lets change that bro.. You have a chance to change evenone's opinion about you, so why not take that opportunity to fix it..
I took down the picture only because I now your ole man and he gets my full respect.. Wouldn't you like to get the same respect for yourself, from all the other guys on here & at the track?? I hope you don't reply with a stupid, smart *** answer like "I don't care about respect" etc
Good luck with everything and remember, you don't need to always have the last say..
I told you not because someone may be wrong or mis informed about something, you need to make it your business and correct them.. Everyday I encounter people who may be saying something thats not 100% accurate, but I just leave them- let it be... Once you start correcting every post or every person, people look at you like a cocky, know it all, and they eventually start laughing at you...
If, in you opinion these guys are wrong, why are you going on and on about it?? Don't lose sleep over something that happen way back when you were still in diapers. The guys that are correcting you have been there and have seen with their own eyes, so why argue with that??
You father holds the record for the worlds fastest stock bodied AM rotary, what else do you want??? He's a legend in his own right and no one is trying to take his accomplishments away from him.
Do you think you will get any respect from the NE guys with the way you're acting? Imagine you come to Atco or Etown and you break something with no spare in the trailer, who will you call on for help?? Ito's shop is close to track, but do you think he will offer his assistance to you?? Maybe to your father, but not to you, only because of your attitude..
Lets change that bro.. You have a chance to change evenone's opinion about you, so why not take that opportunity to fix it..
I took down the picture only because I now your ole man and he gets my full respect.. Wouldn't you like to get the same respect for yourself, from all the other guys on here & at the track?? I hope you don't reply with a stupid, smart *** answer like "I don't care about respect" etc
Good luck with everything and remember, you don't need to always have the last say..
#165
Eats, Sleeps, Dreams Rotary
iTrader: (1)
So, what is the 12a N/A record? I'm guessing high to mid 10's??
#166
DPG Burnout
iTrader: (53)
race tracks
Ito, yeah it's pretty bad out here in SoCal. There's only one 1/4 dragstrip open to the public and it's for street cars about once a month. You guys back east are very lucky to have places to race all over. That's one of the reasons the street racing out here is getting out of hand because there are no legal places to race.
So, what is the 12a N/A record? I'm guessing high to mid 10's??
So, what is the 12a N/A record? I'm guessing high to mid 10's??
#169
Rotary Freak
Ito, yeah it's pretty bad out here in SoCal. There's only one 1/4 dragstrip open to the public and it's for street cars about once a month. You guys back east are very lucky to have places to race all over. That's one of the reasons the street racing out here is getting out of hand because there are no legal places to race.
So, what is the 12a N/A record? I'm guessing high to mid 10's??
So, what is the 12a N/A record? I'm guessing high to mid 10's??
#170
Rotary Freak
Jarrett, also a real nice silver Rx3 out of some town in ohio called "Bullstin Bullet" this was back in 1986 I had a national dragster issue from back then and It use to run in the 10's all motor 12A I remember reading it had home made porting, bridgeport!!!
#172
Rotary Enthusiast
iTrader: (15)
Join Date: Feb 2006
Location: MIA Baby!!!
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
I have a friend with a 12a with a full bridge port, and semi peripheral its bad ***...too bad he can't drive for shyt lol, I hate going to the track and seeing people over rev lol I find it very annoying and its usually the ones who act all badass.
#174
Rotary Freak
You know who is your best bet to get an answer? " Boss" over at the other site.. GRS site. He has tons of information.. Boss= Gabby chassis knows just about all the history. he would be of great info.