I need your help guys and this forum being tha drag racing section i am almost sure that you have my answer,im building a Semi Peripheral motor(S6 plates,new housing,rx8 shaft,3 extra dowells on the compression side and all the goodies) and i want to get 3 stock diameter(not oversized)stud,i tried a couple of places and they only sell them as a kit,did you guys have any sugestion or did any of you have the 3 that i need?thanks

 

Check Pica Racing and Sporty.

 

cris, do you know if pics has stock size studs? the ones i see them selling are oversized and require drilling of the plates/housings. i may be intrested in this too if someone has a stock sized stud soloution.

 

Guru have the stock size.
Mazdatrix is the dealer here.
http://www.mazdatrix.com/getprice.as...3B-STUDKIT-STD

 

turblown sells them for more than $100 less
http://www.turblown.net/store/index.php?categoryID=1

 

pica sells the complete kit for 199.00(stock sized)Thanks guys
but i only need 3,**** it sucks

 

Ask Pica if he will sell them one at a time.

If you don't mind me asking why are you only going to run three stock sized studs? Why don't you forget the dowels and add three oversized studs?

 

I tend to agree with above, why not just run the oversized ones and forget the dowels.

~S~

 

to be honest i was trying to skip some machining time, i was in the phone talking to edwin loquito killer after you guys sugested to talk to Pica (Picas engine builder) about the motor that im building and he sugested to use 4 studs(stock sized)if i dont plan to go above the 500 mark anything above that and i need a full oversized kit and extra dowells,dam it more choices to make.

 

whats the website for pica? $199 seems good to me

 

http://www.picamotorsimport.com/

there are not avaliable at the website,you need to call or e-mail them to get a price,im not sure if they will ship them here to the states,the set that im getting is being pick up at Picas shop(my brother live in PR and then he will ship them up here),Sportys sells them 2 at the same price,if you guys are interested in a couple of sets i might be able to get them here in the states shipper than mazdatrix,guru or turbo blown(of course with some extra charge for gas and shipping(my brother needs to drive from the west coast of the island to almost the east coast)

 

So whats the hp goal?

 

My engine builder and I will be doing every other hole a totak of 8 and useing the oversized one , 700+hp high boost.

 

Any pictures of your setup?

 

I would call pica if I was you , when I talked to him at the nopi event he told me all he run's in his car is 3 stud crusao and boost around 50-55psi .

 

i email x-treme rotaries and they said that they sell them in singles
regular and over size for $38 a stud hopefully this will help out
who ever just wants to buy 3 or 4
thanks julio

 

Yeah, your calling everyone else out to show their ****, let's see some pics of your work in progress.

 

When you guys are refering to "oversized" studs, how big are we talking? I have some .500" material that I'm going to be making some studs with.

 

what all pic's you would like to seeengine wise ? let me know I'll pm them to youasI am not willing to give jay the satisfaction .

Jay you and 680rwhp12a went and hijack the c4 tranny thread downing us with the c4's and all I said was a statement that when I am done with my car both of you guy's were going to be the first to know so we can do a little something . I am not going to give you the satisfaction right now as I stated you will be one of the first to get to see it personally upon completion .

srry to hijack the thread I will not post anymore on this thread other than the studs .

 

**** i got the ones that pica sell and they are oversized(really tick),crap im emaling x-treme rotaries and see if i can get the 4 that i wanted to begin with

 

talked to pica and according to him he runs 4 oversized studs(home made)he offer them to the public for 179.99(the ones that he sent me)they do not offer the 199 kit anymore,HP numbers not sure yet as for now just trying to decide what brand,kind desing internals to use(apex seals,corner seals)

 

If I was you I would find someone thats has a cnc machine and have him cnc your housings along with the steels were you are placing the studs and be done with it . the cnc is extremely accurate and you will not run into any problem and by using the oversize one you will be set to run at higher boost .

 

I will be running the (super Seals ) the black ones as for the corner seal I went with the atkins with the waffer type spring and went with the stock spec on the clearences .

 

I tried the atkins new desing corner seals on my BP and they didnt seal good enough,motor was a pain in the *** to start(new housings)i took it apart and installed a used set of OEM corner seals and the comp went up to 120psi and then after the first hour of running up to 125,Super Seals i used them in the past but they ruin my housings after 2000 miles(lost compression)so i was thinking about OEM or SC.

 

X-treme rotaries website is down,can i get the e-mail address wickedrx2?