my 3rd daugther Sierra learning the fundamentals of drag racing.
#26
Rotary Freak
Thread Starter
sierra's rx7 has been finished. engine is running strong at low boost with stock turbo. you could follow her build on the shop's facebook. a few burnouts for practice and out the the track. enjoy
http://www.youtube.com/watch?v=WyOc-TzPs3o
http://www.youtube.com/watch?v=WyOc-TzPs3o
#27
Rotary Freak
Thread Starter
#28
Rotary Freak
Thread Starter
runs for today were 14.7@97mph.. a few missed shifts but she did pretty good over all. wendsday to etown..
http://www.youtube.com/watch?v=1co2S8-jZwM
http://www.youtube.com/watch?v=1co2S8-jZwM
#31
Rotary Freak
Thread Starter
cano, you know i make my own rules... yes flip flops at the track... cano, you had to see the smile on her face while she was doing the burnouts and launching. she had a total of 8 runs...
#33
Rotary Freak
Thread Starter
one of her many runs. a second gear missed shift. more testing soon..
http://www.youtube.com/watch?v=FfJzLVKNUAQ
http://www.youtube.com/watch?v=FfJzLVKNUAQ
#34
Rotary Freak
Thread Starter
#39
Rotary Freak
Thread Starter
she improves to a 14.4 only got 2 runs. on the 14.4 run the air flow meter came off the hose near the end of the run and shut the car off(car took a nose dive). that run was a decent run until that problem.. the saga continues.. so far she is doing great..
#40
Rotary Freak
Thread Starter
took her car to the dyno. car would not hold more then 4 pounds of boost. car has a serious boost leak. i couldn't find the leak. car made 210rwhp at 4psi. air fuels were 10.00 all across the board. to be continue.
http://www.youtube.com/watch?v=MvgzO...er_profilepage
http://www.youtube.com/watch?v=MvgzO...er_profilepage
#42
Rotary Freak
Thread Starter
#43
Rotary Freak
Thread Starter
In this video, Loren, Sierra's older sister A.K.A. BURNOUT QUEEN is having some fun inside our new shops property. enjoy the vid.. I call them next generation female rotorheads..
http://www.youtube.com/watch?v=aeEdonAFy3E
http://www.youtube.com/watch?v=aeEdonAFy3E
#45
Rotary Freak
Thread Starter
finally had a chance to fix the boost leak. car dynoed 280rwhp@9psi of boost. anything over 9 psi and the car would lean out way to much. so i kept it at 9lbs. later we went to our local race track, Sierra ran 13.0@104mph with a 1.7 60ft mark. on the 13.0 run the car had a clutch slipping issue, other wise she would have ran 12's. car is still on stock ecu..
http://www.youtube.com/watch?v=Tzoje...er_profilepage
http://www.youtube.com/watch?v=Tzoje...er_profilepage