tdazmansFD

iTrader: (1)

Hey guys, I'm installing the Hurst Roll Control to the front wheels on my FD today. I have some questions on how to set it up. The kit that I bought does not have the extra brake lines and fittings needed to complete the install. I would like to know if it's okay to use some Stainless Brake Lines to route everything to the Solenoid. Fortunatly I live 5 minutes from Summit Racing so parts are readily available.
This is what I'm thinking of using:
http://store.summitracing.com/partde...5&autoview=sku

OR
http://store.summitracing.com/partde...5&autoview=sku

I need to know the thread sizes, and AN-Sizes etc. to make connections. Any help, advice or ideas are greatly appreciated.

Thank you, D

finnicky7

All you need is some standard hard brake line, a cutter, and a flaring tool. You can re-use the stock fittings with new line.

Here are the pics of mine. https://www.rx7club.com/3rd-generation-specific-1993-2002-16/line-lock-448601/

tdazmansFD

iTrader: (1)

Thank you very much! I found this thread recently and decided to go this same route.